2013 Sxt Used Cpo Certified 3.6l V6 24v Automatic Fwd on 2040-cars

Auto blog

Stellantis not looking for further mergers, including with Renault

MILAN — Stellantis Chairman John Elkann on Monday denied the carmaker was hatching merger plans, responding to press speculation about a possible French-led tie-up with rival Renault. Elkann said that the Peugeot owner, the world's third largest carmaker by sales, was focused on the execution of its long-term business plan. "There is no plan under consideration regarding merger operations with other manufacturers," said Elkann, who also heads Exor, the Agnelli family holding company that is the largest single shareholder in Stellantis. After abandoning the Russian market, at the time its second largest after France, and reducing the scope of its global cooperation with Nissan, Renault has been seen as a potential M&A target. Speculation intensified after an electric vehicle market slowdown forced it last week to cancel IPO plans for its EV and software unit Ampere. Its market cap remains stubbornly low at little over 10 billion euros ($10.8 billion) despite a financial recovery over the past few years. Stellantis, the product of a 2021 merger between France's PSA and Fiat Chrysler and one of the most profitable groups in the industry, has a market cap of more than 85 billion euros when unlisted shares are factored in. It has a 14 brand portfolio also including Citroen, Jeep, Opel and Alfa Romeo. NEWSPAPER REPORT Italian daily Il Messaggero had said on Sunday that the French government, which is Renault's largest shareholder and also has a stake in Stellantis, was studying plans for a merger between the two groups. A spokeswoman for Renault said on Monday the group did not comment on rumors. France's Finance Ministry had declined to comment on Sunday. Stellantis has crossed swords with the Italian government, which has accused it of acting against the national interest on occasions. Industry Minister Adolfo Urso last week raised the prospect of the Italian government taking a stake in Stellantis to help to balance the French influence. Renault shares pared gains after Elkann's comments to stand 1.2% higher by 1220 GMT, having initially risen more than 4%. Stellantis CEO Carlos Tavares, a Portuguese-national, last week said in an interview with Bloomberg that the group was "ready for any kind of consolidation" and that its job was to make sure that it would be "one of the winners". Analysts, however, question the rationale of a Stellantis-Renault merger, which would also expand the group's excess capacity in Europe.

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

Dodge could resurrect the ACR nameplate on a track-hungry Challenger

Dodge will reportedly celebrate the Challenger's 50th birthday by introducing a track-focused variant of the coupe that will resurrect the American Club Racer (ACR) nameplate. It will arrive as a cocktail of the automaker's best race-bred parts, including bits and pieces sourced from the defunct Viper. The Challenger ACR will be presented as a follow-up to the sold-out Challenger Demon available during the 2018 model year. While Dodge developed the 840-horsepower Demon for drag racing, it's designing the ACR to tackle America's windiest road courses, according to anonymous sources who spoke to website Mopar Insiders. It will need to take a turn, not just go really fast in a straight line. To that end, Dodge will give its popular muscle car more downforce by adding a full body kit that will include a huge adjustable rear wing shaped like the one fitted to the Viper ACR. The racer will be based on the Widebody variant of the Challenger, which handles considerably better than its narrow-bodied sibling, and it will rely on composite materials like carbon fiber to keep weight in check. In other words, it will receive more extreme modifications than the Challenger SRT8 ACR that Dodge introduced during the 2011 SEMA show but never approved for production. If this configuration sounds familiar, it's likely because the carmaker sponsors an independent team named Wesley Motorsports, which races a Hellcat Redeye all over America. It features an adjustable suspension provided by Blistein, slick Toyo tires, and a supercharged, 797-horsepower V8. The Challenger ACR described by Mopar Insiders sounds a lot like the one Wesley Motorsports regularly enters in hill climbs and time attack competitions (pictured). Coincidence? It's too early to tell for sure. Dodge hasn't commented on the report, and it hasn't announced what it has in store for the Challenger's 50th anniversary. The original Challenger made its debut in late 1969, and it arrived in showrooms during the 1970 model year, so Dodge will need to unwrap its surprise before the start of the 2021 model year to keep it timely. Expect an announcement during the first half of 2020. While pricing information remains a mystery, Mopar Insiders added the Challenger ACR will come standard with only a driver's sat. Buyers will be able to add a passenger seat for $1.