2012 Dodge Grand Caravan Sxt Power Sliding Doors on 2040-cars

Auto blog

Ram, Jeep redesigns on hold, Alfa Romeo models may come sooner

Last summer, FCA outlined an ambitious five-year plan that sketched out the company's product intentions for each of its brands through the end of 2018. However, even the best strategies sometimes need tweaking. According to Reuters after speaking with unnamed people at auto suppliers, FCA is now possibly delaying at least a dozen projects in North America for a variety of reasons. From vehicle to vehicle, these postponements allegedly last anywhere from just a few months to over a year. The sources from the suppliers claim that in some cases these tweaks are for engineering and design changes. The next-gen Ram 1500 reportedly has among the shorter delays and is being pushed from mid-2017 to November 2017, according to Reuters. Also, the much-discussed future Jeep Wrangler is allegedly moving a little later to July 2017. Among the vehicles purportedly seeing longer delays, the next-gen Grand Cherokee could get pushed back about a year to 2018. That then forces the launch of the three-row, luxury Grand Wagoneer to be even further away. Jeep's upcoming C-segment CUV and the all-new Chrysler 300, Dodge Charger, and Challenger might also see postponements. The one brand allegedly seeing an accelerated plan is Alfa Romeo. Without going into detail, the sources from these suppliers claim that the Italian automaker is getting even more vehicles for its lineup and could get them even faster than planned. "Those plans need to be flexible and fluid, with the potential to add some vehicles, pull some forward and extend the life cycle of others," FCA said to Reuters about all of these allegations. "We look at these programs on a vehicle-by-vehicle basis." Investment in the auto industry has been a major topic for FCA CEO Sergio Marchionne as of late. He believes consolidation is necessary so that companies aren't burning money on the same projects. Related Video: News Source: ReutersImage Credit: Bill Pugliano / Getty Images Plants/Manufacturing Alfa Romeo Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA fca us

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Dodge to reveal Hellcat-powered Challenger in Detroit?

On top of all the other performance car debuts slated for next week's Detroit Auto Show, we might be able to add one more to the list - the new, supercharged Hellcat V8 from Chrysler. According to new reports, the rumored 640-horsepower mill is likely to cross the Motor City stage in the engine bay of a Dodge Challenger.
As AllPar points out, though, there may be more news than just the fire-breathing engine. While we've seen spy photos of the Hellcat testing under the hood of the current Challenger, there's a very fair chance that it won't arrive until the muscle car is refreshed later this year. The question now is whether that refresh will be shown off alongside the new engine in Detroit, or if it'll be saved, perhaps for the New York Auto Show.
Other details dug up by AllPar include potential transmissions for the supercharged engine - the Mopar-minded site is expecting an eight-speed automatic or a Tremec six-speed manual. Prices, meanwhile, could be in the same elevated range as the Chevrolet Camaro Z/28, at $70,000 to $80,000.