2010 Grand Caravan Handicap Accessible Wheelchair Van Rear Entry Manual Ramp on 2040-cars

Auto blog

FCA's shifter fiasco proves novel gear selectors are a bad idea

What's wrong with PRNDL? Why are automakers trying to overly complicate the simple task of selecting gears? If there's any lesson to learn from the recent news that NHTSA is investigating 853,000 Fiat Chrysler vehicles over its problematic gear selectors, it's that the trend of fancy shifters needs to stop. Now. Last year, NHTSA opened an investigation into Jeep Grand Cherokee models, and has now expanded this probe to include the 2012-14 Chrysler 300 and Dodge Charger. The problem? The shifter – assembled by ZF – is confusing for many drivers. "Testing ... indicates that operation of the (electronic) shifter is not intuitive and provides poor tactile and visual feedback to the driver, increasing the potential for unintended gear selection," a NHTSA document states. More than 100 crashes and over a dozen injuries are linked to this problem, according to The Detroit Free Press. To us, the problem isn't just limited to FCA. These unnecessarily novel gear selectors are spreading like wildfire across the industry. Honda and Acura use a weird pushbutton setup. Lincolns have buttons on the dashboard. Jaguar's shifter electronically raises out of the center console. Mercedes uses a stalk with up-for-Reverse, down-for-Drive, push-for-Neutral arrangement. And what the hell is BMW thinking with its M cars? FCA has since abandoned the confusing shifters in question. The 300, Charger, and Grand Cherokee now use the rotary shift dial that's quickly proliferating across the company's brands. Simplistic gear selectors might not be sexy, but no one ever complained about not being able to find the right gear in a Hyundai Sonata. What's most interesting is that this NHTSA investigation could push FCA – and possibly other automakers – to redesign vehicle functions that otherwise operate as designed. Just because most people will never have a problem putting a Dodge Charger in Reverse doesn't mean there isn't a flaw with the design. But perhaps a more simplistic solution – good ol' PRNDL – would have prevented these issues from the start. Related Video: News Source: The Detroit Free PressImage Credit: Copyright 2016 AOL Government/Legal Chrysler Dodge Jeep FCA shifters

SRT reveals Satin Vapor Edition 300, Charger and Challenger SRT models

With the exception of some notable truck and van introductions, Chrysler brands have tended to use the Chicago Auto Show to bring out new special editions, pimp their aftermarket parts support or indulge in the occasional flight of fancy. That plan is holding true for 2014, as well. Cases in point are these new Satin Vapor Editions of the 2014-model-year Dodge Challenger, Dodge Charger and Chrysler 300 - all from SRT.
The Satin Vapor name may sound like a failed 1970s glam-rock band, or a pseudo-gynecological diagnosis from the Old West, but is, in fact, pretty much a tape-and-trim package for this trio of hi-po Mopars. 300, Challenger and Charger alike come shod with 20-inch aluminum wheels finished in Black Satin Vapor Chrome, and are accented with Satin Black bits aplenty. The 300 gets blacked-out mirrors, spoiler and roof; the Challenger applies it to mirrors and its fuel door; while the Charger has the stuff covering its roof, hood and Super Bee tail graphic.
Interiors of the cars have been mildly updated as well, with all three getting some combination of Nappa leather, ultra-suede and carbon-fiberish finishes.

The Dodge Challenger 1320 is rarer than the vaunted Demon

Dodge stopped making the 840-horsepower Challenger Demon after the 2018 model year, and it filled the gap the coupe left in its range with a slightly tamer variant called 1320. While it wasn't a limited-edition model, production figures released recently cement its status as a future classic. 1320 references the length of a drag strip, which normally checks in at 1,320 feet, and the name speaks volumes: It was built to go flat-out for a quarter mile. It offered all of the go-fast goodies found in the Demon, including a transbrake, a line lock, an SRT-tuned suspension, plus bigger brakes provided by Brembo, and it swapped the supercharged V8 for a naturally-aspirated, 6.4-liter eight shared with the Challenger 392 and tuned to 485 horsepower. It wasn't quite as quick as the Demon, but it remained a race car barely street-legal enough to put plates on, so it occupied a shallow niche. Dodge made 1,054 examples of the 1320 during the 2019 model year, according to Mopar Insiders. Of those, 1,026 units were sold in the United States, and the remaining 28 stayed in their home country of Canada. As for colors, 232 enthusiasts chose Pitch Black, making it the most popular. At the other end of the spectrum, 13 buyers ordered Maximum Steel, which is the rarest color offered to the public. One 1320 was painted in Yellow Jacket, and another in Billet, but they were pre-production cars. To add context, the firm capped Demon production at 3,300 units, including 300 for the Canadian market. The 1320 is returning for the 2020 model year, so it might ultimately become more common than the Demon, but it remains a rare edition that will turn heads at high-profile classic car auctions in a few decades' time. If you've got one, race it, but pamper it off the track, and hang on to it. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.