2010 Dodge Grand Caravan Se Mini Passenger Van 4-door 3.3l on 2040-cars

Auto blog

2015 Ford Mustang vs. Camaro and Challenger [w/poll]

The horsepower wars are tightening among the Detroit Three, as the Ford Mustang, Chevrolet Camaro and Dodge Challenger are getting bigger, more powerful, and yes, more fuel efficient.
That came into sharper focus this week as more information was revealed about the most insane Challenger ever - the 707-horsepower Hellcat - followed quickly by Ford's in-depth showcase of the 2015 Mustang in Dearborn.
It's shaping up to be a golden age for enthusiasts, and what's under the hood is becoming more important than ever.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

2019 Dodge Challenger SRT Hellcat Redeye Widebody First Drive Review | Son of a beast

PORTLAND, Maine — They told us the Hellcat Redeye Widebody is a "Hellcat that's been possessed by a Demon." But what I'm telling myself is, Save it for the track. I hadn't even put the pedal all the way to the floor, and the world around me had warped in my peripheral vision. I peeled my skull from the headrest and contemplated the supercharger under the double-snorkel hood in front of me force-feeding air to the's 6.2-liter Hemi V8, producing a hair under 800 horsepower. With my stomach returning to its usual place, I tried to summon the patience not to roast the tires again. Relax, enjoy the drive, explore the car, and save the rest for the track. I tried to restrain myself from adding to the many strips of rubber already smeared across the hilly, meandering roads between Portland, Maine and Club Motorsports across the state line in New Hampshire. But then there's always another stop sign, and something possesses me to misbehave again as I pull away. The 2019 Dodge Challenger SRT Hellcat Redeye includes a number of borrowed features that helped the Dodge Challenger SRT Demon slap me in the back of the helmet back at Lucas Oil Raceway. It has the same displacement Hemi with a 2.7-liter supercharger providing 14.5 PSI of boost. That pressure is thanks in part to the "Power Chiller," which diverts the A/C refrigerant to cool the air intake. It offers the torque reserve system for explosive launches, as well as the strengthened driveshaft to handle it all. It won't do a wheelie, but it'll scream in your face as it hurls you straight to jail. Compared to the standard Hellcat, it gets a higher top speed of 203 miles per hour, and quarter mile times reduced by a precious tenth of a second (11.1 seconds at 131 mph for the standard Redeye, and 10.8 seconds at 131 mph for the Redeye Widebody). That said, Dodge has ensured that Demon reigns supreme in the Challenger hierarchy. For one thing, the Demon has 840 horsepower and 770 pound-feet of torque, compared to the Redeye's 797 horsepower and 707 pound-feet. The Demon's suspension is specifically tuned for the weight transfer characteristics of drag racing, and can lift its front wheels off the ground if you nail the launch with the narrow tires on it. Also, while the Redeye does have line lock to let the rear wheels spin while braking the front calipers, it doesn't get the Demon's transbrake to keep the car locked into position as throttle is applied for launch.