2005 Dodge Grand Caravan Handicap Van W/ Full Power Vmi Conversion &hand Control on 2040-cars

Auto blog

The last time Dodge recycled the Demon name, it was for a Miata fighter

We and the rest of the automotive world are eagerly awaiting the reveal of the Dodge Challenger Demon. And why wouldn't we be? It's going to be a Hellcat, but with less weight, bigger fenders, more performance, and more Vin Diesel. This isn't the first time we've been excited about a Demon from Dodge, though. Ten years ago, Dodge had another demonic car, but it was very different from the new one. The Demon of 2007 was a lithe little roadster that looked primed and ready to take on the Miata, as well as the now-departed Solstice and Sky twins. The Demon was just under an inch shorter than the MX-5 and the Solstice, and it packed a 172 horsepower 2.4-liter four-cylinder that fell right between the Miata's 170 and the Solstice's 177 outputs. Dodge's estimated the curb weight, which for a concept is largely theoretical, also slotted between the two cars at 2600 pounds. That was about 150 more than the Mazda, and about 200 less than the Pontiac. The pitch perfect specifications were presented in a crisp two-seat roadster wrapper. In many ways, it looked like a baby Viper, with a menacing crosshair grille, slanted headlights, and fat rear fenders. The Demon's line's were brutally simple and geometric, too. They didn't seem far removed from the first-generation Audi TT. The interior was also plain and simple. The key highlights were a horizontal aluminum accent that ran the width of the dash, echoed by an aluminum-covered center console. The instrument cluster was uncluttered, with just four gauges, and the only controls were some climate knobs, a double-DIN head unit, and a six-speed manual. It turns out that the 2007 Demon didn't drive very well, though. You see, we actually drove this concept back in the day, and like many concepts, it still had a long way to go to be production ready. The gearbox would grind, the ride quality was terrible. However, the interior was roomy, and the engine sounded suitably grumbly, if a bit coarse. At the time, we said Dodge should absolutely build the little roadster. In retrospect, the company probably made the right decision not to invest in the Demon. The small rear drive sports car segment was, and still is, an extremely niche market. It would have been a big investment for little return, something FCA today is trying to avoid. This is all before taking into account the fact that the recession was just around the corner. In the end, we can't be too sad though.

2018 Dodge Durango SRT First Drive | Speed, and space for six

We're gathered along with other members of the media at the Indianapolis Motor Speedway to drive a trio of new vehicles from Dodge's performance arm. Alongside a pair of SRT Challengers – the Demon and the Hellcat Widebody – the 2018 Dodge Durango SRT towers over the coupes, and is surprisingly menacing to behold. Its proportions may be relatively simple, but its hood scoop, air vents, and aero features let us know that this car is built for performance. A set of sporty wheels and bright Brembo brakes reiterate its purpose. A badge on the fender bearing the number "392," denoting the V8's displacement in cubic inches, gets us thinking about classic muscle. Even with the Demon sitting feet away, just looking at the Durango has us excited to drive it. Our first stint in the Durango SRT takes place on the infield road course at Indy. We had just gotten out of the Challenger SRT Hellcat Widebody, driving the same circuit, and we expected the Durango to seem tame by comparison. We were mistaken, mostly. The Durango SRT's seating position feels very upright, particularly due to a helmet that kept us from settling into the headrest. Still, we make ourselves comfortable, able to adjust the steering wheel right where we want it. Everything is in Track Mode – transmission, AWD, suspension, and steering – except for stability control, which is still set to Street. Taking off from behind Indy's famous bricks, throttle tip-in is quick, and the Durango SRT springs to life. The Durango feels fast under wide-open throttle in a straight line, which is impressive consider we had just gotten out of a louder, faster coupe. Dodge claims a 0-60 time of just 4.4 seconds, and it's that kind of acceleration that makes us agree with Dodge's boastful claim that the Durango SRT is a "three-row Charger." Then we take the first corner. The steering feels progressive, if not super tight, but the size and weight of the Durango quickly make themselves known. Body roll reminds us that this is, in fact, a tall utility vehicle, and definitely not a Charger. We lean to the side as the tires dig in, pulling the Durango around its axis and toward the apex of the corner despite the lateral momentum they are fighting. We're hesitant, but the instructor in the passenger seat coaches us to keep on the throttle despite what our inner ear is telling us. The Durango manages to stay stuck to our line as we push harder through the corners than we had thought possible.

Dodge Viper plant will close for good Aug. 31

It has been a long time coming, an end rumored since at least 2015, but after 25 years, the Dodge Viper's demise is nigh. Production of the $90,000 bespoke sports car is ending. Therefore, FCA will be shutting down its Conner Assembly Plant on Aug. 31. Automotive News reports that the Detroit plant will be shutting down. The car has been hand-built there since 1995, save for a hiatus in 2010-13 (production began at FCA's Mack Plant in 1992). The Prowler was built there, too, from 1997 to 2002. More than 80 workers currently build the Viper, making Conner FCA's smallest assembly facility. But not many Vipers are sold - 630 last year - despite an enthusiastic following. And of course FCA's own 707-horsepower Dodge Challenger and Charger SRT Hellcats and new 840-horsepower Challenger SRT Demon can't help matters. But the last straw is the fact the Viper can't comply with new safety requirements going into effect. On the bright side, the UAW has seen the plant closure coming since 2015, and FCA has told the state of Michigan that it expects to find positions at other plants for the Viper crew. FCA has been celebrating the Viper valedictory for a couple of years now, offering serialized special editions, including the $121,000 Viper ACR, and touting the ability to build unique Vipers with its "1 of 1" customization program, with a choice of 16,000 unique paint colors and 48,000 unique stripe combinations. Related Video: