2003 Dodge Grand Caravan Se Mini 7 Passenger Van 4-door 3.3l Nice Vehicle on 2040-cars

Auto blog

2013 Dodge Charger SRT8 Super Bee

I can pinpoint the exact moment when I fell in love with this car. It was starting down a nearly straight entrance ramp at 15 miles per hour when I buried the throttle. In a moment, I was thrown back into my seat as the big SRT8's engine came to life with commensurate sound, fury and force, bringing me up to 75 mph in what felt like two blinks of an eye. This thing feels so much quicker than its 470 horsepower and 470 pound-feet of torque would lead you to believe. And mashing the right pedal never, ever gets old.
But beyond sheer speed, I found a whole lot to like about the Charger SRT8 during my week with the Pitch Black test car here in Detroit. And while the whole Super Bee kit isn't really my style, it's really easy to overlook those badges for a package that offers so much for so little.
Driving Notes

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.

Junkyard Gem: 1981 Dodge Challenger

The first Dodge Challenger was an E-Body sibling to the 1970-1974 Plymouth Barracuda, and it was a pure Chrysler product with either Slant-6 or V8 power. Then stuff happened and the Challenger name went away for a while, returning in 1978 on a rebadged Mitsubishi Galant Lambda. For 1981, the Challenger got an updated body, and that's what we've got here in a Denver-area self-service wrecking yard. Chrysler was selling lots of Mitsubishis by the early 1980s, including the Colt econobox, the Dodge Ram 50 pickup, and the Plymouth Arrow truck. The Challenger's Plymouth-badged sibling was the Sapporo. This one had a bunch of late-1990s receipts from Los Angeles-area shops, and a check of the VIN on the California smog-check database shows that it last passed the Golden State's emissions test in 1997. Did it drive to Colorado 20 years ago and then sit until a few months ago? There is no easy way to know. Early Mitsubishi-built Challengers could be had with a 1.6-liter four-cylinder engine, but in 1981 the only engine choice was the Astron 2.6 four-banger, rated at 105 horsepower. Members of the Astron 2.6 family powered everything from Dodge Aries-Ks to Mitsubishi Starions in North America, and production continued nearly into our current century for Chinese-market trucks. Not many miles on this car, and no rust. The Index of Effluency-winning team at the recent Colorado 24 Hours of Lemons race grabbed a few bits from this car for their somewhat related 1976 Plymouth Arrow, but otherwise it appears that this rare classic may go to the crusher more or less intact. It's a lightweight, rear-wheel-drive coupe with decent power (for its era) and a 5-speed manual transmission, but there's just not much of a following in Colorado for these cars. I see the occasional Sapporo or Challenger during my junkyard travels, but the numbers have declined in recent years. Soon they will all be gone. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Related Video: Featured Gallery Junked 1981 Dodge Challenger View 26 Photos Auto News Dodge Automotive History Coupe Performance