We Finance 2007 Dodge Durango Slt 4wd 78k Flexfuel Clean Carfax 3rows Wrrnty 6cd on 2040-cars

Auto blog

1968 Dodge D200 'Lowliner' adds low-down diesel torque to a lowrider

When Mopar does a custom classic car, it's always spectacular, whether it's a Dodge muscle car like the 1,000-horsepower Super Charger or the monster Jeep Five-Quarter off-road pickup. For SEMA this year, Mopar skipped another Dodge sports coupe in favor of a 1968 Dodge D200 pickup truck done up as a lowrider, but with a twist. Or more accurately, with lots of twist. Under the gorgeous candy red metallic body is a 5.9-liter 24-valve Cummins turbodiesel straight-six. It makes an estimated 325 horsepower and 610 pound-feet of torque, and it's paired with a six-speed manual transmission. Representatives from Chrysler estimated the weight of the engine and transmission alone at 1,100 pounds. The diesel engine's power goes to the rear wheels, which are 22 inches in diameter and 11 inches wide with fat 325-mm tires. The front wheels are a tad narrower at 9.5 inches. 1968 Dodge D200 View 7 Photos As cool as the powertrain is, the exterior and the interior of the truck can't be ignored. This generation of Dodge pickup is already intriguing with its distinct character line with a little kink at the end and ribbed and louvered hood. These unique styling cues are accented now that Dodge removed various other details from the body such as the door handles, metallic trim and such. The bumpers were also reshaped to better fit the contours of the body, and the front wheels were pushed forward to reduce the long overhang of the stock truck. The bumpers, grille, and "smoothie" style alloy wheels were also painted in a solid cream color rather than chrome, which both accents the deep red body and gives the truck a more workmanlike feel, as low-trim cars typically had painted trim instead of chrome or stainless steel. The red paint also features subtle Cummins logos on the fenders and Dodge block lettering on the tailgate. The interior continues the simple and classy theme. The original bench seat remains, but with saddle brown leather upholstery. Leather trim has been added throughout, and exposed metal parts have been painted in the same color as the exterior. Simple gray cloth floor mats cover the bottom of the cab, and the instrument panel uses new Mopar gauges in a machine-turned metal housing. The original steering wheel remains, but a custom shifter with red Cummins shift knob sticks through the floor.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Weekly Recap: Ferrari plans to gradually increase production by 2019

Ferrari has long been known for the exclusivity of its performance machines. It's on a different level than Porsche, BMW, and Mercedes. But as it transitions to a new era of independence from Fiat Chrysler, Ferrari is going to get a little less exclusive. It's by design, and it means a subtle, slow ramp-up of production – a move Ferrari believes will ensure its future by meeting growing demand in new markets. The strategy was detailed in SEC documents filed this month as part of the company's pending stock offering. The files reveal Ferrari will gradually increase shipments to about 9,000 units per year by 2019. This is a reversal of Ferrari's 2013 plans to cap production at 7,000 cars annually, which it hit on the nose that year. Ferrari shipments inched up to 7,255 in 2014, though that's down from 2012's record tally of 7,405. Ferrari is a vastly different operation than it was in 2013. Longtime chairman Luca di Montezemolo stepped down last fall, and FCA chief executive Sergio Marchionne has been overseeing the company since then. Its IPO has attracted high levels of attention from enthusiasts and investors. As expected, demand has reportedly outstripped the availability of the stock, which has an estimated offering price of $48 to $52 a share. Speaking of more Ferraris, the company revealed a limited-edition model this week called the F12tdf (shown above). Based on the F12 Berlinetta, the car is a salute to the Tour de France endurance auto race that Ferrari dominated in the 1950s and '60s. The V12 engine's output increases to 769 horsepower, while weight is cut by 243 pounds – allowing for a sprint to 60 mph in 2.9 seconds. Dramatic carbon-fiber elements and a radical redesign of the body panels give the F12 a more dramatic look. It will be limited to 799 units over the life of the car. If this is how Ferrari is increasing production, we're more than okay with the company's new strategy. OTHER NEWS & NOTES Tesla software unlocks Autopilot features Tesla released the latest version of its software for the Model S this week, which allows the all-electric sedan to drive in a semi-autonomous state called Autopilot. Tesla Version 7.0 enables the Model S to maintain lane position, change lanes by touching the turn signal, and manage the car's speed using an advanced, traffic-sensing cruise control. It also has a parallel parking feature, which searches for open spots and then parks your Tesla.