Keyless Entry Luggage Rack Cd Player Bluetooth Automatic Off Lease Only on 2040-cars

Auto blog

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video:

Weekly Recap: Ferrari plans to gradually increase production by 2019

Ferrari has long been known for the exclusivity of its performance machines. It's on a different level than Porsche, BMW, and Mercedes. But as it transitions to a new era of independence from Fiat Chrysler, Ferrari is going to get a little less exclusive. It's by design, and it means a subtle, slow ramp-up of production – a move Ferrari believes will ensure its future by meeting growing demand in new markets. The strategy was detailed in SEC documents filed this month as part of the company's pending stock offering. The files reveal Ferrari will gradually increase shipments to about 9,000 units per year by 2019. This is a reversal of Ferrari's 2013 plans to cap production at 7,000 cars annually, which it hit on the nose that year. Ferrari shipments inched up to 7,255 in 2014, though that's down from 2012's record tally of 7,405. Ferrari is a vastly different operation than it was in 2013. Longtime chairman Luca di Montezemolo stepped down last fall, and FCA chief executive Sergio Marchionne has been overseeing the company since then. Its IPO has attracted high levels of attention from enthusiasts and investors. As expected, demand has reportedly outstripped the availability of the stock, which has an estimated offering price of $48 to $52 a share. Speaking of more Ferraris, the company revealed a limited-edition model this week called the F12tdf (shown above). Based on the F12 Berlinetta, the car is a salute to the Tour de France endurance auto race that Ferrari dominated in the 1950s and '60s. The V12 engine's output increases to 769 horsepower, while weight is cut by 243 pounds – allowing for a sprint to 60 mph in 2.9 seconds. Dramatic carbon-fiber elements and a radical redesign of the body panels give the F12 a more dramatic look. It will be limited to 799 units over the life of the car. If this is how Ferrari is increasing production, we're more than okay with the company's new strategy. OTHER NEWS & NOTES Tesla software unlocks Autopilot features Tesla released the latest version of its software for the Model S this week, which allows the all-electric sedan to drive in a semi-autonomous state called Autopilot. Tesla Version 7.0 enables the Model S to maintain lane position, change lanes by touching the turn signal, and manage the car's speed using an advanced, traffic-sensing cruise control. It also has a parallel parking feature, which searches for open spots and then parks your Tesla.

NHTSA investigating Chrysler for airbags, ignition switches

Chrysler is being targeted by the National Highway Traffic Safety Administration in a pair of actions that focus on over 1.2 million Jeeps, minivans and crossovers.
The first is a "preliminary investigation" that focuses on an airbag issue afflicting the Jeep Commander built in model years 2006 and 2007 and Grand Cherokee from 2005 to 2006. In total, 700,000 vehicles could potentially be affected. It's not entirely clear what the airbag issue is, with The Detroit Free Press simply stating that the restraint systems in the affected Jeeps may be "faulty."
The other investigation is what's called a "recall query" and it covers a problem that General Motors should be familiar with. In this case, there could be a problem with the ignition switches of 525,000 vehicles, ranging from 2008 to 2010 Chrysler Town & Country and Dodge Grand Caravan minivans, to the 2008 to 2010 Dodge Journey crossover. Again, it's not entirely clear what sort of behavior prompted the 32 complaints that NHTSA has received on these vehicles.