Dodge Durango Slt, 2007 2wd. Only 113k, Verry Clean!!! on 2040-cars

Auto blog

Are supercars becoming less special?

There's little doubt that we are currently enjoying the golden age of automotive performance. Dozens of different models on sale today make over 500 horsepower, and seven boast output in excess of 700 hp. Not long ago, that kind of capability was exclusive to supercars – vehicles whose rarity, performance focus, and requisite expense made them aspirational objects of desire to us mortals. But more than that, supercars have historically offered a unique driving experience, one which was bespoke to a particular model and could not be replicated elsewhere. But in recent years, even the low-volume players have been forced to find the efficiencies and economies of scale that formerly hadn't been a concern for them, and in turn the concept of the supercar as a unique entity unto itself is fading fast. The blame doesn't fall on one particular manufacturer nor a specific production technique. Instead, it's a confluence of different factors that are chipping away at the distinction of these vehicles. It's not all bad news – Lamborghini's platform sharing with Audi for the Gallardo and the R8 yielded a raging bull that was more reliable and easier to live with on a day-to-day basis, and as a result it went on to become the best-selling Lambo in the company's history. But it also came at the cost of some of the Italian's exclusivity when eerily familiar sights and sounds suddenly became available wearing an Audi badge. Even low-volume players have been forced to find economies of scale. Much of this comes out of necessity, of course. Aston Martin's recent deal with Mercedes-AMG points toward German hardware going under the hood and into the cabin of the upcoming DB11, and it's safe to assume that this was not a decision made lightly by the Brits, as the brand has built a reputation for the bespoke craftsmanship of its vehicles. There's little doubt that the DB11 will be a fine automobile, but the move does jeopardize some of the characteristic "specialness" that Astons are known for. Yet the world is certainly better off with new Aston Martins spliced with DNA from Mercedes-AMG rather than no new Astons at all, and the costs of developing cutting-edge drivetrains and user interfaces is a burden that's becoming increasingly difficult for smaller manufacturers to bear. Even Ferrari is poised to make some dramatic changes in the way it designs cars.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Hackers stole Jeeps in Texas using FCA's internal dealer software

This article has been updated with details on how the thefts were carried out, and with comments from FCA. It seems the news regarding vehicle hacking continues to get worse, especially when it comes to products from Fiat Chrysler Automobiles. Last year, a Jeep Cherokee in St. Louis, Missouri, was wirelessly hacked from Pittsburgh. Nissan had to shut down its Leaf app because of vulnerabilities. Now, a pair of hackers in Houston, Texas, stole more than 30 Jeeps over a six-month period. The two were arrested by police last Friday while attempting to steal another vehicle. ABC 13 in Houston reports that police had been following Michael Arcee and Jesse Zelay for several months but were unable to catch them in the act until now. The two were using a laptop to connect to and start a vehicle. The thieves were able to access Fiat Chrysler's own DealerCONNECT software. After entering the vehicle identification number, the hackers were able to reprogram the cars' security systems to accept a generic key, according to The Houston Chronicle. Additionally, Automotive News reports that FCA subsequently updated the terms of use for its DealerCONNECT program. These thefts were not related to the UConnect remote hacks from last year. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In April, this surveillance video showed the theft of a Jeep Wrangler Unlimited. It was this footage that first led the police to Arcee and Zelay. The police began to follow and record the pair. That investigation eventually led to Friday's arrest. Both are charged with unauthorized use of a motor vehicle. In addition, Arcee is charged with felon in possession of a weapon and possession with intent to deliver a controlled substance. According to ABC 13, Homeland Security is investigating more than 100 stolen FCA vehicles that they believe were hacked using this method. After their theft, the vehicles were brought across the border to Mexico. FCA is currently conducting an internal investigation into the matter. After this article was posted, the company reached out to Autoblog, stating "FCA US takes the safety and security of its customers seriously and incorporates security features in its vehicles that help to reduce the risk of unauthorized and unlawful access to vehicle systems and wireless communications. FCA US has been cooperating with Houston Police Department since they first started the investigation.