Crew Leather Uconnect Sirius Xm Mp3 Back-up Camera Flex Fuel Roof Rack on 2040-cars

Auto blog

2020 Ford Explorer ST vs 2019 Dodge Durango SRT: How they compare on paper

For a few years now, the Dodge Durango SRT has been the sole three-row performance crossover from a non-luxury brand. That all changes now that the 2020 Ford Explorer ST is coming to market. Now we have two family crossovers with rear-drive-based platforms vying for buyers that demand practicality and power. As such, there's no better time to dig into their specs to see how they compare. We'll check out each crossover's horsepower, torque, space, capability and prices. The full specs are listed below, followed by some analysis afterward. We also compared the regular 2020 Explorer models to other crossovers in this segment, if if that's not enough, you can check out our car comparison tool. Performance The Explorer and Durango go about making power in very different ways. The Explorer goes the force-fed route with two turbos feeding a 3.0-liter V6, while the Durango's enormous 6.4-liter V8 produces power with air flow au natural. Of the two, the Durango has the greater output of 475 ponies and 470 pound-feet of torque, feeding the flames of everyone that lives by the phrase "There's no replacement for displacement." The Explorer is no slouch at 400 horsepower and 415 pound-feet of torque, though. Performance isn't purely based on power, though. Other factors play a role, such as weight, and in that regard, the Explorer is way ahead. At 4,701 pounds, it weighs a massive 809 pounds less than the portly Durango. This also means that both crossovers are very close in weight-to-power ratio, with the Explorer only slightly worse at 11.75 pounds per horsepower and the Durango at 11.6. Less weight will also play a roll in handling, and the Explorer is likely to feel sprightlier without so much mass to shift back and forth. Semi-related to handling are tire sizes. The Durango features 295-mm wide tires on 20-inch wheels. The Explorer has 255-mm wide tires on 20-inch wheels, but 21-inch wheels with 275-mm tires are available. So the Durango is working with more contact patch, but as we mentioned, it's carrying a lot more weight. 2020 Ford Explorer ST View 20 Photos Interior Space and Practicality Although the Durango SRT is the largest on the outside in every dimension, it loses out to Explorer repeatedly inside. The Ford has more headroom, leg room and shoulder room in nearly every row except the third-row where headroom comes up a bit short.

2020 Dodge Challenger Drag Pak comes solely with supercharged power

The Dodge Challenger Drag Pak has returned for 2020, five years after the last one arrived, and two years after it began development. And while in many ways it looks like past Drag Paks, there are a number of tweaks that should make this the fastest and most capable factory drag car yet from Mopar. Unlike the last model, only a supercharged 354-cubic-inch (5.8-liter for the imperically challenged) V8 is available. Mopar says it's more powerful than its predecessor, though exact horsepower wasn't given. It did confirm that the previous car was capable of a stunning 1,200 horsepower. The engine is coupled solely to a three-speed automatic transmission with a manual shifter. 2020 Dodge Challenger Drag Pak View 17 Photos Supporting the massive engine are many chassis, suspension and driveline enhancements. The independent rear suspension and axles are gone in favor of a solid axle from Strange and a four-link suspension. The front remains stock except for double-adjustable Bilstein shocks. The engine is mounted to a subframe member that's beneficial both to weight distribution and center of gravity. The car gets high-performance brakes and custom Weld Racing wheels with "DRAGPAK" engraved on them. The interior features a welded-in roll cage certified for quarter-mile times as quick as 7.5 seconds. Helping keep the car planted without increasing drag too much are front and rear spoilers from the road-going Challenger, a new addition compared with the previous car. Every Drag Pak car also comes standard with a wheelie bar and parachute. Dodge will only build 50 of these cars, and they'll only be offered as race cars that aren't legal for the street. The cars will be eligible for competing in sportsman classes in NHRA and NMCA drag racing series. Pricing and availability hasn't been set yet, but will be revealed sometime next year.

One-of-four carbon fiber-bodied Dodge Challenger Demon listed for sale

Exclusivity often comes at a high price; in this case, it's $169,995. That's how much Texas exotic car dealer BJ Motors is asking for one of the four carbon fiber-bodied Dodge Challenger Demons built by Speedkore. Many enthusiasts would balk at the idea of spending Audi R8 money on a Demon, but this example isn't your average Challenger. Unveiled at the 2017 SEMA show, and upgraded with 1,400 horsepower the following year, the model ditches the standard coupe's metal body panels for carbon fiber parts to lose about 200 pounds. The example offered for sale has six miles on the odometer so odds are no one has verified its quarter-mile time. The dealer noted the Demon in its inventory is the fourth and final carbon fiber-bodied example built. It's fitted with the stock engine, meaning power comes from a supercharged, 6.2-liter V8 engine that delivers 840 horsepower and 770 pound-feet of torque when burning 100-octane race gas, or 808 horsepower and 717 pound-feet of torque when slurping pump gas. It pops a 2.9-foot wheelie as it screams to 60 mph in 2.3 seconds. The person who ordered this Demon new ticked nearly every box on the list of options. It's equipped with heated and cooled front seats, an 18-speaker sound system, plus two-tone leather and Alcantara upholstery. However, as AllPar pointed out, the dealer makes no mention of the Demon Crate, which included skinny front tires, a block-off plate for the passenger-side door mirror, and a conical air filter, among other go-fast goodies. While spending $170,000 on a Dodge Challenger sounds utterly insane, we wouldn't be surprised if this rare example in like-new condition finds a new home quicker than the Demon goes down a drag strip. Dodge made 3,300 units and stock, metal-bodied examples with delivery mileage sold for an average of $143,000 in 2018, according to Hagerty. AllPar learned Speedkore charged $90,000 for the carbon fiber conversion. The equation tilts in favor of the buyer, which suggests the car's next owner may be more of an investor than an enthusiast. If you're more into classics, Speedkore also gave a 1970 Charger the carbon fiber treatment and rounded out the modifications with a 996-horsepower Demon crate engine. Alternatively, if you have a family to haul, the company made a carbon fiber-bodied Charger with 1,525 horsepower at the crank when running 26 pounds of boost. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences.