2024 Dodge Durango R/t on 2040-cars

Auto blog

2015 Dodge Challenger SRT 392

I've just started reading the third installment in a planned five-book biography of Lyndon Baines Johnson, Master of the Senate, written by the incomparable Robert Caro. Conveniently, a recent trip to drive the BMW X6 M and 228i Convertible was to be staged in Austin, TX, within easy driving distance of LBJ's birthplace, Johnson City. And yes, the city is named for his family. Having completed my duties with the Bimmers, I borrowed the spangled 2015 Dodge Challenger SRT 392 you see above, to squire me around the Texas capitol for a weekend, and as a lift out to the Hill Country homestead of our 36th President. Johnson City isn't exactly a road trip mecca, but there's a pretty good brewery, a museum, the reconstructed LBJ house to take snapshots of, and it's a nice drive to get out there if you've got a 485-horsepower muscle car at your disposal. Driving Notes With the heroic Hellcat, this 392 and the R/T Scat Pack (that Brandon Turkus reviewed recently), there are more SRT-treated Challengers to choose from than ever before. There are 707 obvious reasons that the Hellkitty is the top dog (as it were), but there are important difference between this 392 and the Scat Pack, too. Both cars make use of the 6.4-liter Hemi V8 putting out 485 horsepower and 475 pound-feet of torque, but the 392 also gets an adaptive suspension, six-piston Brembo brake calipers (instead of four-piston), wider tires, leather and Alcantara seats, a heated steering wheel, a louder stereo and HID headlights. When LBJ was campaigning for his seat in the House of Representatives, he would've loved to have something as potent as this monster of a V8 under the hood of his canvassing car. The 6.4L snorts with authority before it sends the big coupe forward to just about any speed I'd ask of it, and with a quickness. Johnson was known for haranguing drivers to step on it, when all that stood between himself and a few more votes was the ability to fit one more stump speech into the day. The 392 feels as though it could cover a quarter of the state of Texas in a morning if you throttle down deep enough (faster even than the Johnson City Windmill, I'd guess). Though there's a six-speed manual available, I'm actually quite fond of the eight-speed automatic in the 392. The two-pedal setup better suits the fast-cruiser attitude of the car, and it never served up any poorly conceived shift logic when I left it in D. Of course, the roads are better now than they were in the 1930s and 40s, too.

Dodge engineers trying to shoehorn Pentastar into Dart?

The fact that the Dart's launch has been a pretty dismal affair isn't what we'd call secret. Judging by its mounting inventories and poor critical reception, Dodge's successor to its unloved Caliber has struggled since it hit the market. And while both of those are difficult problems to address, at least their cause is well known - the powertrain.
Even Fiat-Chrysler CEO Sergio Marchionne has acknowledged that the powertrain options in the Dart are substandard, admitting at January's Detroit Auto Show that the powertrains are "less than ideal." Leading with the 1.4-liter turbocharged four-cylinder found in the Fiat 500 Abarth left a bad taste in the mouths of consumers thanks to the laggy engine and dead throttle response (to say nothing of the manual and dual-clutch gearboxes that needed more refinement). The addition of the 184-horsepower 2.4-liter Tigershark in the Dart GT has helped matters some, but apparently Auburn Hills doesn't think it's quite enough.
If rumors are to be believed - get that salt ready - a possible solution may be in the works. A report from Allpar is claiming that Dodge is considering fitting a Pentastar V6 into the Dart's engine bay. As the Mopar-obsessed website points out, the critically acclaimed Pentastar is available in three different sizes - 3.0 liters, 3.2 liters and the original 3.6 liters. We don't get the 3.0 here in the US, but the 3.2 can be found in the new Jeep Cherokee and the 3.6 has been seemingly fitted to every model Chrysler can shoehorn it into.

Chop the top of your new Dodge Viper for $35,000

We have good news, and we have bad news. First, the good: It's now possible to get a brand-new Dodge Viper roadster, which is nice, considering we're in the dead of summer and many of us like wind-in-the-hair motoring. Now, the bad: This is not a factory option from the automaker, instead coming courtesy of an aftermarket company called Prefix Performance, and that means it's going to cost you some serious coin.
Called Medusa, this drop-top Viper was created without the knowledge or consent of Dodge, but that's probably fine because Prefix works with the automaker already for the final preparation of the American supercar, including paint. According to the company, the current, fifth-gen Viper was built with a convertible version in mind, so no chassis strengthening is required. From the looks of the somewhat grainy photos available, the conversion appears of very high quality.
Want one? Well, that means you're going to need to procure a Viper - Prefix has 10 units ready for transformation as it stands - and that's going to cost at the very least $102,485. Then, you'll need to write a check for an additional $35,000 for Prefix to surgically remove the car's roof. Thing is, for that kind of cash, a prospective owner could buy, among other very nice options, a Viper hardtop and a loaded Miata, or a Corvette Stingray convertible and several pockets full of change. Or, perhaps a new Viper hardtop and a used, first-gen Viper convertible?