2021 Dodge Durango Sxt Plus on 2040-cars

Auto blog

Chrysler set to make $266M-investment into 8-speed transmission production

Chrysler will shortly make a significant $266-million investment into its Kokomo, IN transmission factory in a bid to expand production of its eight-speed automatic transmissions. The gearboxes, which are built under license from Germany's ZF Friedrichshafen, have been well received by customers and critics, and according to an SEC filing obtained by Automotive News, the transmissions will eventually find their way to all of Chrysler's rear-drive offerings (Viper and heavy-duty Ram models, aside). According to AN, a Chrysler spokesman says the investment has not been confirmed, but once it is, it'll mark the company's latest in a growing line of investments at the facility. Chrysler has poured $1.5 billion into Kokomo since 2009.

Mopar teases a big Hemi crate engine for SEMA

Mopar has released a new video teaser hinting at the release of a large and powerful crate Hemi engine at SEMA later this month in Las Vegas. The video functions like a lesson on symbolism in an English lit class. It opens with smoke and settles on a pair of backlit, large-clawed paw prints that look to be feline in origin. Then we hear earth-shaking pounding sounds of something larger than the paw prints that stomps over them. Then cue an overhead shot of what looks to be a vintage-model Dodge Charger and its growly Hemi engine entering the frame and then gunning the engine. Mopar already offers three crate Hemi V8 engines, topped by the 6.2-liter supercharged Hellcat, good for 707 horsepower and 650 pound-feet of torque, found in the Dodge Charger SRT Hellcat and marketed for pre-1976 classic muscle cars. So promising that "Something big is coming" is really saying something. Could it be a crate version of the 808-hp Hemi 6.2 that was found in the Dodge Demon, which was rated at 840 hp on racing fuel? Or is it something different? Curiously, Mopar says its reveal is planned for Tuesday, Oct. 30 at the odd time of 4:26 p.m. Could that time be a reference to the 426 Hemi — and specifically the Generation III 426 Hemi "Elephant" that Chrysler made several years ago? That technically qualifies as "bigger," and it would also align with both the muscle car-era Charger and round, earth-shaking footprints shown in the video. Time will prove whether we were right. Related Video: Image Credit: Mopar SEMA Show Chrysler Dodge Performance Classics dodge demon dodge charger srt hellcat

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat