2014 Dodge Durango Limited on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Hypermiling a Ram 1500 EcoDiesel to 38.1 mpg

You never quite know what Wayne Gerdes has up his sleeve. The man who coined the term hypermiling is always looking for adventurous ways to prove that anyone – even you... yes, you – can eke out more miles per gallon just by changing the way you drive. Saying that is easy. Proving it by going on outlandish cross-country drives is hard. But for Gerdes and his team of fuel economy fiends over at CleanMPG, hard is half the fun. Our latest adventure appeared, at first glance, to be nearly impossible. Which is why we always answer the phone when Gerdes calls. He likes to take journalists along on his drives, not only to try teach us how to hypermile but also to prove that we can be taught. The first time I 'helped' him and his team was when we got over 30 miles per gallon in a 2011 Ford F-150 XLT with the EcoBoost 3.5-liter V6. The EPA rated that truck with at just 16 mpg in the city and 22 on the highway. So, we'll count that trip as a success. Next up was a cross-country drive last fall in a trio of Audi TDI vehicles to prove that you don't need to drive extra slow to beat the EPA numbers. In fact, we made it from Los Angeles to New York City in just over 46 hours, cramped but not cranky. We had once again proven that how you drive is hugely important to your fuel usage. Our latest adventure appeared, at first glance, to be nearly impossible. The EPA says that the Ram 1500 EcoDiesel we would be driving gets just 22 combined mpg (19 city and 27 highway). Gerdes' idea was to drive it as far north from Houston, TX towards Detroit, MI as we could go on one tank. The day before we left, our itinerary got an extra stop. Instead of taking one of the official Shell Eco-marathon prototype vehicles to Detroit, it was decided to bring the winning diesel-powered prototype from the just-finished event to The Henry Ford Museum, where it had been arranged the car would be displayed. The winning car was built by a small team (just four students) from Sullivan High School in Sullivan, IN, who managed to beat a number of college teams with a score of 1,899.32 mpg. That target would be a bit out of reach for the Ram, but could we get 1,000 miles from the tank? Since the truck has a 26 gallon tank (officially, anyway), that would mean the EPA says we could only go 702 miles, assuming all highway driving. Could we make up 300 miles with careful driving? That spells both challenge and fun.

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.