2013 Dodge Durango Rt on 2040-cars

Auto blog

Small 3-row crossover SUVs specifications compared on paper

There's no shortage of three-row vehicles on the market for carrying seven or more people and their stuff wherever they all need to go. Just about every car company has at least one large crossover or traditional SUV with three rows of seats, and there are still plenty of minivans to pick from. But most of these vehicles are large, pricey, and frequently thirsty. Fortunately, there are still a handful of smaller crossovers that deliver 7-passenger capability in a smaller, cheaper package. We've gathered four of the small three-row set here to compare them based on space, power, fuel economy, pricing, and more. They include the very old Dodge Journey, the slightly less old Mitsubishi Outlander and Kia Sorento, and the relatively new Volkswagen Tiguan. You can see the raw numbers in the chart below, followed by a more detailed breakdown and some notes on how we like each of these vehicles. For in-depth opinions on the vehicles, be sure to check out our full reviews, and if you want to compare these with other vehicles, try out our comparison tools. Engines, transmissions and performance Interestingly, three of the four crossovers here utilize similar engines for their four-cylinder offerings. The Dodge, Kia and Mitsubishi all feature naturally aspirated 2.4-liter four-cylinder engines. Only the Volkswagen Tiguan chooses turbocharging and a smaller 2.0-liter displacement. But because of its turbocharger, the Tiguan's four-cylinder is easily the most potent, making a healthy 221 pound-feet of torque, which is more than 40 more than the Sorento, the crossover with the next most torque. The VW is also second-most powerful, just one horse behind the Sorento. The Outlander is the least powerful in the four-cylinder class. The Journey is only barely better, but it will probably feel as slow or worse thanks to its ancient 4-speed automatic. The four-cylinder Sorento and Outlander each have 6-speed automatic transmissions, and the VW has an 8-speed. The Sorento with a V6 has an 8-speed, too. View 17 Photos Moving up to the V6 class, the Outlander is once again at the bottom. It actually makes less torque than the turbo VW Tiguan. The Journey and Sorento are almost perfectly matched. The Journey makes a bit more torque; the Sorento makes a bit more power. The Journey also gets upgraded to a 6-speed automatic. Another powertrain consideration to bare in mind is whether all-wheel-drive is necessary.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

2020 Dodge Charger Hellcat Widebody to race at Pikes Peak

The 2020 Dodge Charger Hellcat Widebody may be world's most badass Charger right now, but it won't be for long. This weekend, Dodge will unveil an even more serious Charger, a one-off racer that will run at Pikes Peak. Tim Kuniskis teased the race car during the Widebody reveal. It will have more power, more tire and more brakes than the road car. He didn't provide exact numbers for any of that, but we at least know it will have more than 707 horsepower, tires wider than 305 millimeters, and better brakes than the regular Hellcat. He said it will have an upgraded version of the Hellcat's 6.2-liter engine. We wouldn't rule out 797 horsepower like in the Hellcat Redeye and in the company's One Lap of America Dodge Durango. We suspect we'll have more concrete details and photos of the car very soon, since the Pikes Peak International Hill Climb takes place this Sunday. One other tidbit: Kuniskis said that we shouldn't expect any of the parts from the race car to show up as Mopar accessories. But we bet there will be plenty of aftermarket companies more than happy to help paying customers recreate it.