2012 Dodge Durango Citadel Sunroof Nav Dvd 20's 29k Mi Texas Direct Auto on 2040-cars

Auto blog

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Here's the last Dodge Viper

The last Dodge Viper has rolled off the line. Ralph Gilles, FCA's Head of Design since April 2015, posted a photo gallery on Instagram with the caption "So long... #Viper." The gallery includes multiple photos of the Conner Avenue Assembly Plant in Detroit, where the Dodge Viper has been built since 1995. In the gallery, we see a yellow unit with black stripes coming down the line, and Gilles is posing in front of it with Dodge/SRT Head of Design Mark Trostle. The yellow Viper is followed by a red car, with nothing else behind it on the line. That red Viper is "the ultimate last one," according to Gilles, adding that the automaker will be holding onto that unit for the company's heritage collection. You can click through the gallery here: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. When asked in the comments if the Viper was discontinued because of low sales, Gilles replied, "Not really as it sold well over the last couple of years at a great mix of mostly ACRs in the last 15 months. It has more to do with a new ejection mitigation regulation airbag that simply won't fit in our package." Despite the solemnity of the post, Gilles is upbeat about the Viper in general, saying "The Gen5 had a great 5 model year run and the Viper platform which has not changed that much over the years had a great 25 year run!" He says he has great memories with the car, and that "they are relatively robust so they will be around making memories for generations to come!" Still, we hope to see something that lives up to the Viper's wild, raw spirit come from FCA in the near future. Related Video: Related Gallery Roadkill Nights Dodge Vipers 2017 View 40 Photos News Source: Instagram: @ralphgilles Plants/Manufacturing Dodge Automotive History Coupe Performance Supercars FCA viper

How to tune a car right: Part 3, tuning Mopar with OST Dyno

Not long ago, I wrote a story about a pony car tuned with a supercharger. The blower install had been done properly. Then the car's owner bolted on a set of great looking wheels wrapped in good looking but inexpensive rubber. On my first test drive, I couldn't get any of that supercharged sweetness to the ground. It was the perfect ride for parking in a Burger King parking lot on a Friday night. I tooled around on a Sunday drive, shaking my head that someone had spent five figures to get more power the right way, with a clean install, then wiped out the gains so thoroughly that the stock engine would likely have overwhelmed the tires. This got me thinking about the ways people ruin their quest for horsepower, either on the front end by not insisting on a clean install and paying the money for it, or on the back end with supplemental purchases like cheap tires or cheap gas. So I called three tuners, one focused on GM, one on Mopar, one on Ford, to find out what people should know about how to get the best power for their goals, and how to make sure they are able to use all that power. The first interview in this three-part series was with Blake Leonard at Top Speed Cincy in Cincinnati, Ohio, the second with Brandon Alsept at BA Motorsports in Milford, Ohio. This third and last interview is with Micah Doban at OST Dyno in Slippery Rock, Pennsylvania, a family business with more than 40 years of Mopar expertise specializing in Gen III Hemis, but tuning everything from land-speed cars and drag racers to Jeeps The interview has been edited for clarity and concision. Do people who come to OST generally know what they want? Probably 80% of the people who come in simply want more power with no particular ET goal [ET is a kind of bracket handicapped drag racing – ed.]. WhatÂ’s the best way to start a Mopar tune? The first thing is what people often skip, and that's to find a tuner or a shop. People will throw parts on their cars that the Internet said to, then go to a tuner who does things a different way, and [the tuner is] like ‘No we don't like to use these injectors, we don't like these parts.Â’ You have to find someone familiar with the parts that are on your car or that you're planning to put on your car. So having a goal and then finding a tuner who can help you with that goal is proper way to start. Exactly. And a lot of tuners have their own formula – and when I say tuner I mean someone that also does work to the cars.