2012 Crew 3.6l Auto Silver Low Miles No Rust!! on 2040-cars

Auto blog

One-of-four carbon fiber-bodied Dodge Challenger Demon listed for sale

Exclusivity often comes at a high price; in this case, it's $169,995. That's how much Texas exotic car dealer BJ Motors is asking for one of the four carbon fiber-bodied Dodge Challenger Demons built by Speedkore. Many enthusiasts would balk at the idea of spending Audi R8 money on a Demon, but this example isn't your average Challenger. Unveiled at the 2017 SEMA show, and upgraded with 1,400 horsepower the following year, the model ditches the standard coupe's metal body panels for carbon fiber parts to lose about 200 pounds. The example offered for sale has six miles on the odometer so odds are no one has verified its quarter-mile time. The dealer noted the Demon in its inventory is the fourth and final carbon fiber-bodied example built. It's fitted with the stock engine, meaning power comes from a supercharged, 6.2-liter V8 engine that delivers 840 horsepower and 770 pound-feet of torque when burning 100-octane race gas, or 808 horsepower and 717 pound-feet of torque when slurping pump gas. It pops a 2.9-foot wheelie as it screams to 60 mph in 2.3 seconds. The person who ordered this Demon new ticked nearly every box on the list of options. It's equipped with heated and cooled front seats, an 18-speaker sound system, plus two-tone leather and Alcantara upholstery. However, as AllPar pointed out, the dealer makes no mention of the Demon Crate, which included skinny front tires, a block-off plate for the passenger-side door mirror, and a conical air filter, among other go-fast goodies. While spending $170,000 on a Dodge Challenger sounds utterly insane, we wouldn't be surprised if this rare example in like-new condition finds a new home quicker than the Demon goes down a drag strip. Dodge made 3,300 units and stock, metal-bodied examples with delivery mileage sold for an average of $143,000 in 2018, according to Hagerty. AllPar learned Speedkore charged $90,000 for the carbon fiber conversion. The equation tilts in favor of the buyer, which suggests the car's next owner may be more of an investor than an enthusiast. If you're more into classics, Speedkore also gave a 1970 Charger the carbon fiber treatment and rounded out the modifications with a 996-horsepower Demon crate engine. Alternatively, if you have a family to haul, the company made a carbon fiber-bodied Charger with 1,525 horsepower at the crank when running 26 pounds of boost. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences.

This Dodge Challenger was stolen, used in police chases and recovered all in the week before its SEMA debut

Most of the drama in a SEMA build is in getting the car ready in time for the big show. That was all Quintin Bros Auto and Performance was expecting when they built a supercharged Dodge Challenger Scat Pack with custom carbon fiber body parts, aftermarket wheels and upgraded brakes. But unfortunately, a bigger drama happened in the week leading up to the show. And it was the worst kind. As part owner Pete Quintin told us, the car was shipped out in a small trailer, and while the delivery driver was spending the Monday night a week before the show at a hotel, a thief showed up in a stolen pickup and made off with the trailer and the car. It wasn't an easy task, either, as the delivery driver had parked the trailer in with the truck blocking it. The thief used his own (well, not his own, but you know what we mean) truck to shove the trailer hitch out where he could access it, then hooked it up and took off. Several miles down the road, he parked, opened up the trailer and vanished in the Challenger. The following morning, the delivery driver discovered the theft, and Quintin Bros immediately informed the owner so that a police report could be filed and a search could begin. The trailer was found not too long after, thanks to someone who was following the story on social media. But obviously the car was missing. Folks on social media were also helpful in tracking the car, in addition to the help of the Las Vegas Police Department (LVPD). What followed was a week of chasing the car down. Twice the car was found in parking garages, Quintin said, and both discoveries resulted in police chases. The second chase was the most dramatic, with a police officer stopping after noticing the car. The thief was in it, and he bolted upon seeing the officer. He powered the Challenger right through the nose of the police car, damaging both. The chase culminated on the highway, where Quintin told us 14 cars were in pursuit, and the thief got up to 150 mph. Police ended up calling off the chase because of the danger. But the car was damaged enough that the thief eventually abandoned it at one last garage, where it was picked up on Thursday. Once the car was recovered, things gradually began looking up for the Quintin family. Pete Quintin said that as soon as LVPD found out the Challenger was meant to go to SEMA, the department got the car out of evidence impound as fast as it could so the shop could show off the beat-up car.

How to tune a car right: Part 3, tuning Mopar with OST Dyno

Not long ago, I wrote a story about a pony car tuned with a supercharger. The blower install had been done properly. Then the car's owner bolted on a set of great looking wheels wrapped in good looking but inexpensive rubber. On my first test drive, I couldn't get any of that supercharged sweetness to the ground. It was the perfect ride for parking in a Burger King parking lot on a Friday night. I tooled around on a Sunday drive, shaking my head that someone had spent five figures to get more power the right way, with a clean install, then wiped out the gains so thoroughly that the stock engine would likely have overwhelmed the tires. This got me thinking about the ways people ruin their quest for horsepower, either on the front end by not insisting on a clean install and paying the money for it, or on the back end with supplemental purchases like cheap tires or cheap gas. So I called three tuners, one focused on GM, one on Mopar, one on Ford, to find out what people should know about how to get the best power for their goals, and how to make sure they are able to use all that power. The first interview in this three-part series was with Blake Leonard at Top Speed Cincy in Cincinnati, Ohio, the second with Brandon Alsept at BA Motorsports in Milford, Ohio. This third and last interview is with Micah Doban at OST Dyno in Slippery Rock, Pennsylvania, a family business with more than 40 years of Mopar expertise specializing in Gen III Hemis, but tuning everything from land-speed cars and drag racers to Jeeps The interview has been edited for clarity and concision. Do people who come to OST generally know what they want? Probably 80% of the people who come in simply want more power with no particular ET goal [ET is a kind of bracket handicapped drag racing – ed.]. WhatÂ’s the best way to start a Mopar tune? The first thing is what people often skip, and that's to find a tuner or a shop. People will throw parts on their cars that the Internet said to, then go to a tuner who does things a different way, and [the tuner is] like ‘No we don't like to use these injectors, we don't like these parts.Â’ You have to find someone familiar with the parts that are on your car or that you're planning to put on your car. So having a goal and then finding a tuner who can help you with that goal is proper way to start. Exactly. And a lot of tuners have their own formula – and when I say tuner I mean someone that also does work to the cars.