2005 Dodge Durango Limited Sport Utility 4-door 5.7l - Great Condition on 2040-cars

Auto blog

2020 Dodge Charger Hellcat Widebody, Scat Pack Widebody get grip, go faster

You all knew this was coming. Dodge basically showed it to the public a few months ago. But it's finally official, the 2020 Dodge Charger Hellcat Widebody and naturally aspirated Scat Pack Widebody are going into production. Like the Challenger Widebody, the Charger version is defined by its, well, wide body, which is now standard on all Hellcats and an option on Scat Packs. The fender flares add a total of 3.5 inches of width. Dodge also tweaked the front and rear bumpers and added wider side skirts to help the flares blend into the body. The Hellcat gets a unique rear spoiler, whereas the Scat Pack sticks with the same one its scrawnier twin uses. 2020 Dodge Charger Scat Pack Widebody View 20 Photos But the big advantage to this wide body is the fact Dodge can stick way more tire under the Charger. All Charger Widebody models get 11-inch-wide wheels with 305-mm tires at all four corners. Each version gets revised suspension, too. The Hellcat gets stiffer front springs, thicker front and rear anti-roll bars and retuned shocks. The Scat Pack gets a similar update, but without the thicker front anti-roll bars. Both cars also get six-piston front brake calipers from Brembo with two-piece rotors. All these handling upgrades mean the Charger is an even more impressive track machine. Dodge says the Hellcat now pulls 0.96g on a skid pad, and the Scat Pack Widebody does a little better at 0.98g. The Hellcat has also improved its lap time of Chrysler's 2.1-mile test course by 2.1 seconds, and the Scat Pack improved by 1.3 seconds. Both cars are also still fast in a straight line, with Dodge saying the Hellcat will hit 60 mph in 3.6 seconds on the way to a 10.96 quarter-mile time. Which, Dodge proclaims, makes it the world's most powerful and fastest mass-produced sedan. The Scat Pack Widebody will hit 60 in 4.3 seconds on the way to a 12.4-second quarter-mile.

Killing the Dart and 200 might lower FCA's fuel economy burden

Killing the Dodge Dart and Chrysler 200 could allow FCA US to take advantage of an intriguing quirk in the next decade's fuel economy regulations. By increasing its ratio of trucks versus cars, the automaker might not need to worry so much about hitting the more stringent efficiency rules. At first thought, it might seem harder for an automaker with a ton of trucks to meet the government's mandated 54.5 mile per gallon corporate average fuel economy for 2025. However, every company doesn't need to hit that lofty figure, according to The Detroit Free Press. The exact target varies by the product mix between trucks and cars. "While passenger car and light truck categories have separate CAFE targets, it's still true that more trucks versus cars in a company lineup means a lower combined CAFE target," Brandon Schoettle, Project Manager Sustainable Worldwide Transportation at the University of Michigan Transportation Research Institute, told Autoblog. "While passenger car and light truck categories have separate CAFE targets, it's still true that more trucks versus cars in a company lineup means a lower combined CAFE target." FCA US' current product blend has 80 percent pickups and CUVs, which means the company stands to benefit from a lower fuel economy target. It might not seem entirely fair environmentally, but this is a great move from a business perspective. The new CAFE rules aren't set in stone, according to The Detroit Free Press, but potentially taking advantage of the regulation is just one more reason to cut the Dart and 200. Modern crossovers also aren't gas guzzlers like older SUVs, which could make it easier to hit the fuel economy target. "Utilities offer practicality and versatility that cars do not, and now, built on car architectures, they do not penalize consumers on fuel economy as they once did," AutoTrader Senior Analyst Michelle Krebs told Autoblog. Schoettle warns that FCA is still making a gamble by killing the small sedans. "Depending on the previous sales volumes and how much these vehicles might have exceeded their specific CAFE targets, it's possible that these cars helped earn CAFE credits for FCA that they could bank for future use," he said. "Future sales breakdowns [car vs.

GTC deliveries take Rauh collection up to 79 Vipers [w/video]

How many Vipers is enough? One of the ten-cylinder supercars might be too much machine for most drivers to handle, but not for Wayne and D'Ann Rauh. The Texas couple already own 77 of Dodge's flagship model. And now they've taken delivery of two more. At the Conner Avenue Assembly Plant in Detroit on Friday, the Rauhs received the keys to a pair of Dodge Viper GTCs, customized through the automaker's "1 of 1" customization program. The program allows owners to spec their Viper just the way they want it, with 50 million unique combinations. For their 78th and 79th additions, the Rauhs ordered one decked out in brown with black stripes for Wayne, the other in purple with white for D'Ann, to whom the majority of the collection belongs. Of course, both come equipped with an 8.4-liter V10 driving 645 horsepower and 600 pound-feet of torque to the rear wheels through a six-speed manual transmission. The couple will add the pair to their collection in Arp, TX, a town on the outskirts of Tyler, located between Dallas and Shreveport. The Rauh's garage already includes the last of the previous-generation Vipers decked out in two-tone gold finish. eGarage profiled the couple two years ago when their collection numbered "only" 65, and we have no doubt that number will only continue to grow as long as Dodge keeps building the legendary super-snake. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Texas Dodge Viper Enthusiasts Receive Keys to Two New Customized '1 of 1' Dodge Viper GTC Models, Now Owners of 79 Vipers Total July 24, 2015 , Detroit - Dodge Viper owners Wayne and D'Ann Rauh elevate Viper Nation enthusiasm to a whole new level. On Friday, July 24, the couple visited the Conner Avenue Assembly Plant in Detroit to receive keys to not one, but two new customized "1 of 1" Dodge Viper GTC models, making them proud owners of a total of 79 Dodge Vipers. Through the new Viper "1 of 1" customization program, owners can create their very own one-of-a-kind Snake. No two customers can order the same configuration, including color, in the same model year. With the introduction of matte-finish exterior paint, the 2016 Viper is now offered in more than 50 million unique build configurations, made up from the more than 16,000 unique paint color options and more than 48,000 unique stripe combinations.