1998 Dodge Durango Slt Sport Utility 4-door 5.2l on 2040-cars

Auto blog

2022 Chrysler 300 and Dodge Challenger, Charger recalled for faulty TPMS sensors

Stellantis is recalling some of its longest-running models to address a tire pressure monitoring system (TPMS) sensor defect that may be erroneously indicating a low-pressure condition — 52,340 cars shipped with sensors built with batteries that may fail prematurely, triggering a TPMS light when there is no actual safety threat.  A TPMS light that remains constantly illuminated is not only annoying but it could also mask a real tire pressure loss, which is a safety hazard. Stellantis says the production range for potentially impacted models runs from September 7, 2021 to June 9, 2022, indicating it took some time for issues to crop up in the wild, so just because no issue has crept up yet, doesn't mean it won't later on.  Notices have begun circulating to dealers and should be sent to owners by early September. In the meantime, owners should verify any tire pressure warnings independently before driving their vehicles.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. How To Fix A Tire Leak | Autoblog Wrenched

Dodge to sell off first Challenger SRT Hellcat for charity

Want to get your hands on a new 2015 Dodge Challenger SRT Hellcat, and can't wait to be the first to get one? Las Vegas will be the place to be on September 27. That's where Barrett-Jackson will auction off the very first example. And you'd better bring your checkbook, because the bidding is sure to be fierce with all the proceeds going to charity.
The supercharged Challenger with VIN 0001 has been hand-painted in Stryker Red (usually reserved for the Viper) and features special badging, documentation and accompanying memorabilia - not to mention, of course, that 707-horsepower, 6.2-liter supercharged Hemi V8. The car will be on display this weekend as well at Barrett-Jackson's Hot August Nights auction in Reno.

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.