Nice 1974 Dodge Dart Swinger Classic Muscle Car That Runs And Drives Great!!!! on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

Buyer says Dodge dealer gave him wrong Charger, failed to notice for 2 months

Mistakes happen, and they happen all the time. But when that mistake means a customer doesn't get what he or she paid for, something's gotta give. That's what one Dodge Charger buyer claims he is trying to sort out with his local dealership. Two months after taking delivery, the owner (going by the user name Dakrbouncer4689 on Reddit) says he got a call from his local Dodge dealership reporting a little problem. He had ordered and paid for the Charger SXT (pictured above on the dealer lot), but was given a Charger SE instead. The SE being the lower trim level, this presented one set of problems – namely a $2,000 discrepancy in equipment, like a five-speed automatic versus an eight-speed, a 4.3-inch infotainment display instead of 8.4, heated seats, leather steering wheel, premium audio, remote starter and so on. The second set of issues is that the VIN number on the paperwork (including the registration and insurance papers) of course doesn't match that of the car itself. The dealer, having obviously made a rather large mistake, apparently called the owner in to sort out the mess, but according to the customer's account, things didn't go as smoothly. Instead of immediately working to address the problem, the salesman kept the owner waiting, acted like it was no big deal, and offered only to swap the cars with no compensation for the trouble. Fortunately, the manager proved more sympathetic and apologetic, and offered the customer three options: he could swap the cars (re-doing the tinted windows on the SXT that the customer had done on the SE and throwing in leather seats for free), he could keep the SE (with the dealership handling the paperwork, throwing in the leather seats, adjusting the price and refunding an extra $400), or they could cancel everything, return the car and part company. As we go to press, the Charger owner had yet to make (or at least share) his decision. But while the principle of caveat emptor makes us wonder how he managed to take home a different car from the one he paid for, clearly the salesman and the dealership made a pretty large mistake by presenting him with the wrong set of keys and letting him off the lot without double checking it all. News Source: Darkbouncer4689 via Reddit, World Car Fans Dodge Car Buying Car Dealers Economy Cars Sedan