Dodge Dart Dart Sport 360 4-speed Matching Number Build Sheet Surviver on 2040-cars

Auto blog

Chrysler recalling over 200k vehicles across its brands

With more than 200,000 units across six separate recalls and almost all of its brands, it appears that Chrysler has officially jumped headfirst into the recall pool this month. The National Highway Traffic Safety Administration has issued three official recalls for the automaker, and The Detroit News is reporting that the automaker itself has announced three more.
The biggest of the recalls applies to about 120,000 Dodge Charger, Dodge Challenger and Chrysler 300 models for 2011 and 2012 due to faulty wiring harnesses for the seat-mounted side airbags, which could lead to these airbags not deploying in the event of a crash. A little more than 60,000 two-wheel-drive versions of the 2007-2008 Dodge Nitro and 2008 Jeep Liberty SUVs are being recalled due to a heat shield that could cause the driveshaft to break, which if that isn't bad on its own, could then hit underneath where the airbag sensor is mounted, causing the airbags to deploy. Wrapping up NHTSA's recall notices, about 20,000 Jeep Patriot and Jeep Compass models for 2012 are also being recalled due to a problem with the fuel tank transfer tube that could lead to the vehicle stalling. The LX car recall campaign is going into effect this month, while the other two will start next month - all three notices are posted below.
In addition to the official NHTSA recalls, The Detroit News is also reporting that Chrysler is recalling more than 16,000 Ram trucks and a small number of Dodge Dart sedans. Around 6,500 2013 Ram 1500 trucks will be recalled due to an improper adjustment of the parking brake cable from the factory, while 7,000 Cummins-powered 2013 Ram Heavy Duty trucks are being recalled due to an engine cover that does not have as much heat resistance as it is supposed to. Finally, a total of 46 Dodge Dart sedans are being recalled due to a problem with the brake calipers and/or parking brake.

VLF Force 1 V10 is a rebodied Viper priced like a Lamborghini

It would appear that Henrik Fisker is done with hybrids. His latest project, called the Force 1, packs an oversized V10 engine with no electric assist in sight and all the environmental credentials of a herd of flatulent cattle. Alongside the Karma-based, Corvette-powered Destino, the Force 1 is the second product from VLF Automotive. Fisker has taken partnership in the new firm as chief designer alongside chairman Bob Lutz and CEO Gilbert Villarreal. The company isn't saying explicitly what the Force 1 is based on, but it doesn't take a CSI team to trace its roots back to the Dodge Viper. Never mind that it's being built in Auburn Hills – the same Detroit suburb where Chrysler is headquartered – or that it was jointly developed by Fisker and professional Viper racer and dealer Ben Keating. It also happens to be powered by an 8.4-liter V10, and there aren't many of those kicking around the industry. Instead of the Viper's 645 horsepower and 600 pound-feet of torque, the Force 1's ten-cylinder engine is optimized to deliver 745 hp and 638 lb-ft. That, according to VLF, is enough to send the coupe rocketing to 60 in 3.0 seconds flat, covering the quarter-mile in under 11 seconds on its way to a top speed of 218 miles per hour. The power is transmitted to the Pirelli PZero rubber through a six-speed manual, but VLF says it will fit it with an automatic at the customer's request. Around that massive engine and two-seat cockpit, Fisker designed a new shape that, for better or for worse, looks way more aggressive than the Viper's. The Force 1's proportions are tellingly super-snake, but the curves are replaced by some very angry-looking angles and vents. Its head- and taillights are ultra thin, and the deep-dish, split-four-spoke wheels seem to visually split the difference between the three-spoke wheels on the original Viper and the five-spoke alloys it wears today. If you doubted the Force 1's origins before, the interior ought to give it away, with its wide tunnel and familiar surfaces. Only VLF has refinished it in leather, suede, and Alcantara, all diamond stitched with contrasting thread to help position this as a more luxurious prospect than the Dodge. It even fit between the seatbacks place for two champagne bottles that we hope nobody would consider consuming before trying to handle that much power. Of course, none of this will come cheap.

Dodge rolls out Shaker package for 2015 Challenger

Having an awesome Hemi engine under the hood can deliver impressive performance, but for those who lament not being able to see that big V8 engine doing its thing, hidden away under the hood, Dodge offers the Shaker hood on its Challenger muscle car. And it's just released the option for the updated 2015 model. Now available on two engines and three trim levels – including the Challenger R/T and R/T Plus with the 5.7-liter V8 and the 6.4-liter Challenger 392 – the new Shaker hood brings cold air into the engine compartment and lets everyone see that V8 (or at least an appendage thereof) shaking away in plain view. Arriving 45 years after the original Shaker Challenger, the package includes a satin black hood scoop, cold-air intake, conical air filter and optimized air box, along with Shaker graphics inside, out and under the hood. The 2015 Dodge Challenger R/T Shaker and R/T Plus Shaker are available to order now, priced at $35,495 and $38,495, respectively (plus a $995 destination charge), and come bundled with the Super Track Pak. Order books open in March for the 392 HEMI Shaker, which also comes with the Scat Pack, for $42,495 (plus destination and $1,000 gas-guzzler tax if equipped with the manual transmission). Dodge is Shaking Up the Muscle Car Segment Again; Opens Orders for New 2015 Challenger 'Shaker' Models Dodge Celebrates 45 Years of Its Functional "Cold-air Grabbing" Hood Scoop That "Shakes" With the Legendary HEMI® V-8 Engine's Movement - Back by enthusiast demand, Dodge returns the "Shaker" to the Challenger lineup – now expanding the functional cold-air induction hood scoop on two HEMI V-8 engines and three performance-packed models - "King of the Shakers" – all-new 2015 Dodge Challenger 392 HEMI Scat Pack Shaker combines the ultimate combination of 485 best-in-class horsepower and legendary Dodge heritage cues with a functional Shaker hood - Dodge Challenger R/T Shaker and R/T Plus Shaker models feature the legendary 5.7-liter HEMI V-8 engine with unique hood and intake design combined with a functional exposed-element cold-air intake system - New 2015 Dodge Challenger R/T Shaker and R/T Plus Shaker are available for ordering now, with the 392 HEMI Scat Pack Shaker model available for customer orders in March February 13, 2015 , Auburn Hills, Mich.