Dodge Dart 1969 H Code on 2040-cars

Auto blog

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat

2020 Dodge Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition celebrates an icon

Fifty years ago, Dodge commissioned Creative Industries to build the 1969 Dodge Charger Daytona as a homologation special to satisfy NASCAR rules. The extraterrestrial-looking coupe conquered at the race track, broke records, and frightened any onlooker possessed of a weak constitution; it's claimed that even the carmaker's general manager at the time, Bob McCurry, considered the Charger Daytona the ugliest car he'd ever laid eyes on. Time having worked its magic, Dodge is celebrating the now-iconic Winged Warrior with the 2020 Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition. The new model goes without a nose cone and vertical stabilizers, but it does loose 717 horsepower from its 6.2-liter supercharged V8, which is 10 more than the standard car. The grunty sedan will be available in four colors: Pitch Black, Triple Nickel, White Knuckle, and B5 Blue exclusive to this model. B5 was the original paint code for a Blue Fire Poly hue available on Dodge and Plymouth products built between 1969 and 1972. Evoking the original as well as highlighting the decklid spoiler on the new Charger, the black, nickel, and blue sedans get white "Daytona" decals on the rear quarter panels and a white spoiler, matching white Hellcat badges on the front fenders. White cars get blue "Daytona" decals and spoiler, and Hellcat badges in a bright finish. Twenty-inch Warp Speed wheels finished in Satin Carbon on all-season Pirellis and black Brembo brakes complete the exterior overhaul. Inside, heated and cooled 12-way adjustable performance seats are trimmed in Nappa leather and Alcantara, with blue cross-stitching joining seatbacks embroidered with the word "Daytona." The flat-bottomed, suede-wrapped steering wheel with silver stitching and "velour-bound" floor mats will only come in this model, the festival of special appointments also including the dynamica suede headliner, carbon fiber instrument panel and bezels, light black chrome trim pieces, and blue stitching on the dash, shifter, center console armrest, and door panels. Dodge will only produce 501 units, said to match the number of cars necessary for NASCAR homologation at the time, and each wears a plaque identifying it as "X out of 501." NASCAR rules in 1969 demanded 500 units, actually — the car Dodge built in 1968 to race was called the Charger 500, in fact. Also, Creative Industries built 503 1969 Charger Daytonas for the U.S. and another 40 for Canada, but who's counting?