4dr Sedan Se New Manual Gasoline 2.0l 4 Cyl Engine Blue Streak Pearl Coat on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Driving the Jeep J6, Shakedown Challenger and other Mopar concepts

Mopar has been a one-stop-shop for factory-backed performance modifications and accessories on FCA products for a long time now. You want a 707-horsepower engine for your old Plymouth Belvedere? Mopar has you covered with the Hellcrate. Maybe you want a lift and off-roading lights on that newly-bought Wrangler? Mopar can accommodate those wants (or needs, we don’t judge) as well. We get to see some of the companyÂ’s weirdest creations every now and then, but rarely do we get the opportunity to drive the FCA Mopar concepts. ThatÂ’s what made this past Woodward Dream Cruise so special: We got to rip some of MoparÂ’s finest and most recent creations up and down Woodward Avenue. Everything from a 1971 Challenger restomod to the brand-new Easter Jeep Safari J6 concept was in attendance, so letÂ’s get right to it. Mopar Woodward View 6 Photos 1967 Plymouth Hellvedere This car is near the pinnacle of what you can do with off-the-shelf Mopar purchases. It was only a humble 1967 Plymouth Belvedere before Mopar dropped the 707-horsepower supercharged V8 from the Hellcat into the engine bay. Sound ridiculous? Yeah, it is. Other parts of it are new as well, including the disc brakes. Good call. However, Mopar didnÂ’t remove the classic car charm from the entire driving experience. The steering, for example, is surely as slow and inaccurate as it was back in 1967. That doesnÂ’t help matters when youÂ’re trying to put 707 horsepower to the pavement with less-than-ideal rear rubber. Floor it in damn near any gear of the Tremec six-speed, and the front end rises straight up as the rear kicks sideways with the force of many mules. There are no electronics such as traction control or stability control to step in and wrangle the car into submission. But hey, who wants them, anyway? The question remains: Should you buy a Hellcrate engine for your classic? If money were no object, the easy answer is yes. Have at it so long as you love smoky burnouts and excessive amounts of horsepower. Just make sure you know how to deal with that much power before you stick your right foot in it.   Dodge Challenger Shakedown View 15 Photos 2016 Dodge Shakedown Challenger Concept WeÂ’re going downhill in horsepower with this restomod, but the drivability and ease of driving goes way up. Dodge showed this “Shakedown” concept at SEMA awhile back, and as with most concept cars, getting a chance behind the wheel is a special opportunity.

Junkyard Gem: 1977 Dodge Colt Mileage Maker Coupe

While Ford and GM each had the resources to develop their own Michigan-designed subcompacts for the dawn of the 1970s— the Pinto and Vega, respectively— Chrysler couldn't afford the huge price tag for such a project. Instead, Chrysler's European operations were tapped for a couple of models that sold well enough on the other side of the Atlantic, giving us the Plymouth Cricket (known as the Hillman Avenger in the UK) and the Simca 1204 (aka the Simca 1100 in France). American car shoppers gave those two models the cold shoulder, but then Chrysler found genuine sales success by making a deal with Mitsubishi to sell the Colt Galant with left-hand drive. This became the Dodge Colt, with sales beginning in the 1971 model year. Though the 1971-1978 rear-wheel-drive Colts were once as commonplace as Corollas or B210s on American roads, they have all but disappeared today. That makes today's Junkyard Find, discovered in a Denver-area yard last week, particularly interesting. This car shows signs of having been in the hands of a speed-crazed enthusiast owner, including an aftermarket steering wheel and one-piece racing seats with slots for five-point harnesses. The primer-gray paint is another clue. The rear-wheel-drive Colts were reasonably quick for their time, and they could be made genuinely quick with basic engine upgrades. This Mitsubishi Saturn four-banger has a tube header, hot-rod ignition system, and a two-barrel (Mikuni-made) Solex carburetor. We can assume there's probably some kind of cam upgrade under the valve cover, too. The shifter is gone, but the original transmission in this car was either the base four-speed or optional five-speed manual. A three-speed automatic was available for $270 (about $1,275 today). Later on, front-wheel-drive Colts (and Mitsubishi Mirages) could be bought with the Twin-Stick overdrive rig, which gave drivers eight forward speeds and the opportunity to make Twin-Stick beer taps. The 1977-1978 Dodge Colt two- and four-door sedans were based on the Mitsubishi Lancer and were a bit smaller than the 1971-1977 cars, while the wagon version moved to the Galant Sigma platform. The build tag shows that this car started life as the cheapest 1977 Colt model, the "Mileage Maker" two-door sedan (Dodge dealers called it a coupe, so that's what I'm calling it in the title).