2014 Aero New Turbo 1.4l I4 16v Automatic Fwd Sedan on 2040-cars

Auto blog

2020 Dodge Charger Hellcat Widebody, Scat Pack Widebody get grip, go faster

You all knew this was coming. Dodge basically showed it to the public a few months ago. But it's finally official, the 2020 Dodge Charger Hellcat Widebody and naturally aspirated Scat Pack Widebody are going into production. Like the Challenger Widebody, the Charger version is defined by its, well, wide body, which is now standard on all Hellcats and an option on Scat Packs. The fender flares add a total of 3.5 inches of width. Dodge also tweaked the front and rear bumpers and added wider side skirts to help the flares blend into the body. The Hellcat gets a unique rear spoiler, whereas the Scat Pack sticks with the same one its scrawnier twin uses. 2020 Dodge Charger Scat Pack Widebody View 20 Photos But the big advantage to this wide body is the fact Dodge can stick way more tire under the Charger. All Charger Widebody models get 11-inch-wide wheels with 305-mm tires at all four corners. Each version gets revised suspension, too. The Hellcat gets stiffer front springs, thicker front and rear anti-roll bars and retuned shocks. The Scat Pack gets a similar update, but without the thicker front anti-roll bars. Both cars also get six-piston front brake calipers from Brembo with two-piece rotors. All these handling upgrades mean the Charger is an even more impressive track machine. Dodge says the Hellcat now pulls 0.96g on a skid pad, and the Scat Pack Widebody does a little better at 0.98g. The Hellcat has also improved its lap time of Chrysler's 2.1-mile test course by 2.1 seconds, and the Scat Pack improved by 1.3 seconds. Both cars are also still fast in a straight line, with Dodge saying the Hellcat will hit 60 mph in 3.6 seconds on the way to a 10.96 quarter-mile time. Which, Dodge proclaims, makes it the world's most powerful and fastest mass-produced sedan. The Scat Pack Widebody will hit 60 in 4.3 seconds on the way to a 12.4-second quarter-mile.

Chrysler recalls AWD 300, Charger, Ram 1500 over ZF transmission

What do the Chrysler 300, Dodge Charger and Ram 1500 all have in common? Yes, they're all Chrysler products, and two of them are based on the same platform. And we're sure you could find more similarities between them all, but the common trait we're looking at here is that, while they all come standard in rear-drive form, they're also available with all-wheel drive. And it's the transmission in those models that's the subject of the latest recall notice issued by the National Highway Traffic Safety Administration.
The output shaft on the eight-speed automatic transmission supplied by ZF to Chrysler for the AWD versions of the 300, Charger and Ram 1500 is apparently prone to fracture. That in the end could leave the vehicle without power and could, according to the NHTSA investigation, increase the chance of a crash. The vehicle could also roll away if even if left in Park without the handbrake applied.
That's why Chrysler is calling in 4,194 examples of those three models from the 2013 model year. Dealers will be responsible for inspecting the transmissions and, where necessary, replace the entire unit. See the full recall notice below for all the details.

2019 Dodge Challenger Hellcat with twin-scoop hood spied with no camouflage

Dodge recently teased an updated 2019 Challenger SRT Hellcat sports coupe complete with an all-new hood with dual scoops. It didn't reveal anything else about the vehicle, saying more details were coming. And now we have more details, but not in the way Dodge probably wanted. We can now see the updated Hellcat with the new hood. To be perfectly honest, it's pretty much what we expected. The teaser photos indicated that the hood was the only major body change, and this car confirms it. The rest of the body is identical to a normal Hellcat. The bumpers, grille mesh, even the wheels are all standard Hellcat parts. Even the slotted rotors and Brembo calipers look the same. This car does suggest that the hood will be available on both the narrow-body Hellcat and the Hellcat Widebody, the latter of which was featured in the teaser images. There is actually one other minor difference on this 2019 Hellcat's exterior, and that's the grille badging. There's now a vintage-style badge with "Challenger" written in script off to one side. Currently only one grille and badge design is available on Hellcat, and it features just the SRT Hellcat logo. It appears the SRT badge is still present, but blocked off on this prototype. So it's possible this new badge comes with the new hood as a sort of retro package for Hellcat. We should have all the details on this and other 2019 Challengers when the car is officially revealed later this summer. Related Video: Featured Gallery 2019 Dodge Challenger SRT Hellcat Spy Shots View 11 Photos Image Credit: KGP Photography Spy Photos Dodge Coupe Performance dodge challenger srt hellcat