2013 Dodge Dart Sxt Fuel Saver Auto New - Free Shipping Or Airfare on 2040-cars

Auto blog

The Dodge Demon isn't the only way to a 10-second quarter mile

The Demon's rear tires smoke, the front tires lift – and in under ten seconds (after having spent $85,000) you've covered a quarter mile. In short, we fully get the attention shown Dodge's SRT Demonstrator. With disruption the operative word of the times, it's good to see a representative of the movement coming from Detroit. The SRT Demon delivers disruption in spades. There is, however, a viable alternative – and it doesn't require getting on the list at your Dodge dealer. If you want to do 0-60 in under three seconds or the quarter mile in around 10, the folks at Honda, Kawasaki, Suzuki and Yamaha – with any of their one-liter superbikes – have you covered. The gestation of what we now know as the superbike came roughly a decade after the debut of the muscle car. It was in the early '70s, as emission and safety regulations – along with rising insurance premiums – decimated the ranks of Detroit's fastest that motorcycle makers found their magical, almost mystical momentum. Honda's CB750 four was arguably the first, followed soon by Kawasaki's Mach III and Z-1. After that, it was Katie-bar-the-door, with more horsepower offered by Japanese OEMs until, invariably, insurance premiums went higher and, during the last recession, 20-somethings couldn't get affordable loans or insurance. Today, Japan's Big Four are once again engaged in a horsepower war, fueled by the rising interest in MotoGP, along with the rising profits available when selling a $20,000 motorcycle. And if that $20,000 - $10K per wheel – seems high, simple math tells you it's less than half of what you'll spend per corner if buying Dodge's Demon. The specs tell the tale. The Demon, fattened by both its flared fenders and a platform dating from the George Bush administration, supports its 4,200+ pounds on a wheelbase of 116 inches. That's in contrast to Suzuki's GSX-R1000 – redesigned for 2017 – which puts its 443 pounds atop a wheelbase of just 56 inches. To maximize its Hemi-supplied 800+ horsepower, Dodge diverts the air conditioning from the Demon's interior to the engine, which makes racing on a summer evening (you guessed it) devilishly hot. On Suzuki's GSX-R1000 – or similarly-equipped superbikes – almost all of the air at 100+ miles per hour is directed at you. To further underscore the differences, know that the GSX-R1000 and its like-minded competition can turn a quick corner, while the Demon is hard-pressed to execute a U-turn at the end of a quarter-mile straightaway.

Ward's announces 10 Best Engines 2015

Ward's Auto has named its 10 Best Engines for 2015, covering a range of powerplants from fuel-sippers to fire-breathers. As with past years, forced-induction reigns supreme, with seven of the ten engines featuring a turbo or supercharger. This year is slightly different, though, as two of the seven blown engines are turbocharged three-cylinder mills, from the Ford Fiesta and Mini Cooper. They're joined by the 2.0-liter turbo four from the Volvo S60, the 1.8-liter turbo four from the Volkswagen Jetta and the 2.0-liter boxer from the Subaru WRX. BMW and Chrysler were the only marques to be named to this year's list twice, with the electric motor from the i3 joining the Mini's three-pot, and the 3.0-liter turbodiesel V6 in the Ram 1500 and Jeep Grand Cherokee repping the diesel crowd, alongside a certain supercharged monster. Hyundai also took a prize with a zero-emissions powertrain, with the Tucson FCV's 100-kilowatt fuel cell making the list (apparently Ward's is quite generous with what it deems an "engine"). Rounding out the list are two Autoblog favorites, each displacing 6.2 liters, but producing their power very differently. On the one hand, Chevrolet's overhead-valve, 455-horsepower V8, found in the Corvette, makes its power the old fashioned way. And in the other corner, we have one of the most exciting engines of the year – the 707-hp, 6.2-liter, supercharged Hellcat V8, featured so prominently in the Dodge Challenger and Charger SRT Hellcat. "We spend a lot of time reading the powertrain tea leaves throughout the auto industry, and we're proud that this year's list is a microcosm of all the latest innovation coming from automakers," said Ward's Editor-in-Chief Drew Winter in a statement. "It's not just a list for enthusiasts or for environmentalists," he says. "There's something for every vehicle shopper and every budget. All the powertrains on this list deliver a first-rate driving experience," Winter added. Scroll down for the full list from Ward's, and let us know which engines you think belong and which should have been included in this year's rankings. Ward's 10 Best Engines of 2015 Announced by Penton's WardsAuto Honorees span most diverse and technically advanced engines in 21 years of recognized powertrain excellence SOUTHFIELD, Mich., Dec. 10, 2014 /PRNewswire/ -- Penton's Wards 10 Best Engines of 2015 have been announced.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.