1974 Dodge Dart - Sport Coupe - 318 Engine - on 2040-cars

Auto blog

Hellcat motor 'fits like a glove' in the Wrangler and Gladiator, says Jeep

Just like "technically correct" is the best kind of correct, "technically possible" is the best kind of possible. Specifically, it's technically possible to slot a Hellcat crate motor into the Jeep Wrangler and Gladiator, as confirmed by Jeep brand chief Tim Kuniskis. Speaking to Australian media last week, Kuniskis went on to say that "everybody" keeps asking him if the supercharged, 6.2-liter Hellcat V8 fits in the Wrangler and Gladiator, and that the answer is yes. "It fits like a glove," said Kuniskis. But — there is a but — the fitment is so close for comfort, it makes the combination one that Jeep can never produce. "There's no air space around the engine [...] so you have no crush space, you have nothing that can be used to absorb energy in a crash. It's not a problem to put it in — other than emissions and fuel economy — except it would never pass any crash tests, and that's a problem," as Kuniskis told Drive. However, since the Hellcat is now out of the bag, it's probably only a matter of time until hobbyists with access to these engines will start putting them into Wranglers and Gladiators. And with the time-honored piece of advice — just don't crash into anything — it'd be a combination worth seeing and hearing. Just to throw it out there, a "Hellcrate" engine costs less than $20,000 new. Kuniskis also said that Jeep is "gauging interest" for the J6 concept, one of the Easter Jeep Safari concepts that were just revealed. "[The J6] is just a concept at this stage. But that doesn't mean we're not going to gauge interest for it." However, he said justifying its production is apparently "tough."

Dodge Durango could get eTorque mild hybrid system in 2020

The 2020 Dodge Durango appears slated to get a mild-hybrid powertrain option. That's the word from moparinsiders.com, which unearthed the news from documents relating to contract negotiation between the FCA and the UAW. Although the documents give no further details, it's a pretty safe bet that we're talking about Chrysler's eTorque mild-hybrid system, which was introduced on the Ram 1500 pickup and has since been extended to the Jeep Wrangler. Currently, the Wrangler offers the eTorque system on the 2.0-liter inline-four and the 3.6-liter Pentastar V6, both on the Sahara model only, while the Ram 1500 makes the mild-hybrid system standard with the 3.6-liter V6 and an option with the 5.7-liter Hemi V8. The V6 eTorque powertrain makes 305 horsepower and 269 pound-feet of torque (Ram) or 285 horsepower and 260 pound-feet (Wrangler). The Wrangler's four-cylinder eTorque is good for 270 horses and 295 lb-ft. The V8 version in the Ram is good for 395 horsepower and 410 lb-ft of torque. In all cases, the eTorque system does not increase peak output over the standard version of the gasoline engine. The mild-hybrid system does provide a minor fuel-economy boost. In the Wrangler, the 3.6-liter with eTorque has EPA city estimates that are 1 mpg better than without the system. On the Ram's V8, eTorque adds 2 mpg city and 1 mpg highway. (The 2.0-liter sees no improvement in its EPA ratings.) It's not known whether the Durango will add eTorque to its V6, or V8, or both. Either engine could do with a fuel-economy boost, as the V6 is EPA rated at 19/26 mpg city/highway (RWD) and 18/25 mpg (AWD), while the V8 version has estimates of 14/22 mpg. Related Video:

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.