1972 Dodge Demon Project Car And Spare Parts on 2040-cars

Auto blog

Dodge Hornet supposedly snapped inside Alfa Romeo Tonale factory

It appears that someone in Stellantis' Pomigliano d’Arco Assembly Plant in Italy couldn't keep their cellphone to themselves. Video uploaded to the Alfa Romeo Club Italia Facebook page, then quickly removed, purports to show Dodge's brand-engineered version of the Alfa Romeo Tonale in the same factory where the Alfa will be built. The Dodge is expected to be called the Hornet, and there are a few differences between it and and Alfa Romeo, which is understandable. But if the screenshots on Twitter are accurate, then the Dodge looks a lot closer to the Alfa Romeo than perhaps anyone expected. The front fascia and hood fall in line with Dodge's design language. The Alfa grille is replaced by a narrow, stepped upper grille, and the hood is one of the vented units similar to those available for Dodge's R/T performance trims. And as Mopar Insiders noticed, the silhouette of this car's front end matches a vehicle silhouette Dodge showed during Stellantis' 2021 EV Day.   Inside, the Italian brand's crest in the steering wheel center cap is replaced by Dodge's twin slashes, and the steering wheel has been stripped of the large, curved paddle shifters the Tonale showed on its debut. There's still a start/stop button on the steering wheel, but where the Tonale has a driving mode dial on its dash, this supposed Hornet has another start/stop button. Dodge's push-to-start buttons are usually on the instrument panel, so our guess is that the wheel is a holdover for testing. On the center tunnel, the parking alert buttons and Italian Tricolore flag on the Alfa Romeo are replaced by three different buttons.   We've known Dodge has two electrified vehicles on the way, and the Hornet name has been low-key buzzing for two years. Fiat Chrysler applied to trademark the name in the U.S. in March 2020; at the time, it was thought a vehicle with that name could replace the Journey. In 2021, a July rumor out of Italy was the first whisper of the Hornet name being attached to the Alfa Romeo Tonale. In August, when Stellantis CEO Carlos Tavares said Dodge would get a PHEV in 2024, watchers pegged that model as the Hornet. That hybrid powertrain would show a year after the vehicle's launch, the Hornet anticipated as a 2023 model with the Tonale's turbocharged 2.0-liter four-cylinder. That engine could get the same 256 horsepower and 295 pound-feet of torque as the Tonale, or be boosted to satisfy Dodge's performance credentials.

Stellantis invests more than $100 million in California lithium project

Stellantis said it would invest more than $100 million in California's Controlled Thermal Resources, its latest bet on the direct lithium extraction (DLE) sector amid the global hunt for new sources of the electric vehicle battery metal. The investment by the Chrysler and Jeep parent announced on Thursday comes as the green energy transition and U.S. Inflation Reduction Act have fueled concerns that supplies of lithium and other materials may fall short of strong demand forecasts. DLE technologies vary, but each aims to mechanically filter lithium from salty brine deposits and thus avoid the need for open pit mines or large evaporation ponds, the two most common but environmentally challenging ways to extract the battery metal. Stellantis, which has said half of its fleet will be electric by 2030, also agreed to nearly triple the amount of lithium it will buy from Controlled Thermal, boosting a previous order to 65,000 metric tons annually for at least 10 years, starting in 2027. "This is a significant investment and goes a long way toward developing this key project," Controlled Thermal CEO Rod Colwell said in an interview. The company plans to spend more than $1 billion to separate lithium from superhot geothermal brines extracted from beneath California's Salton Sea after flashing steam off those brines to spin turbines that will produce electricity starting next year. That renewable power is expected to cut the amount of carbon emitted during lithium production. Rival Berkshire Hathaway has struggled to produce lithium from the same area given large concentrations of silica in the brine that can form glass when cooled, clogging pipes. Colwell said a $65 million facility recently installed by Controlled Thermal can remove that silica and other unwanted metals. DLE equipment licensed from Koch Industries would then remove the lithium. "We're very happy with the equipment," he said. "We're going to deliver. There's just no doubt about it." Stellantis CEO Carlos Tavares called the Controlled Thermal partnership "an important step in our care for our customers and our planet as we work to provide clean, safe and affordable mobility." Both companies declined to provide the specific investment amount. Controlled Thermal aims to obtain final permits by October and start construction of a commercial lithium plant soon thereafter, Colwell said. Goldman Sachs is leading the search for additional debt and equity financing, he added.

The mad genius of killing the Dodge Dart and Chrysler 200

Sergio Marchionne isn't crazy. At least not with respect to the recent announcement that Fiat Chrysler Automobiles will cease production of the Dodge Dart and Chrysler 200. Instead of crazy I'd call this CEO ruthlessly pragmatic, and perhaps short-sighted. The latest revisions to FCA's most recent five-year plan tell some truths about the company's finances. In other words, it can't afford to build mainstream sedans. With only 87,392 units sold in 2015, the Dart is an also-ran in the segment. The axe falls easily there - Chrysler hasn't had a compact-car hit since the second-generation Neon. The 200 isn't so cut and dried: Last year sales increased 52 percent, and the 177,889 total for 2015 is more than those for the Subaru Legacy and Kia Optima. But looking at the overall FCA picture the Chrysler 200 has to go, at least from a short-term perspective. The vehicles that make big money – Ram trucks; Jeep's Cherokee, Grand Cherokee, and Wrangler – can't be made fast enough. FCA can't afford to idle the 200's Sterling Heights, MI, assembly plant to cut back on inventory when other plants are running flat out. It seems crazy to throw away 265,000 sales, but FCA is leaving money on the table by not building more profitable vehicles. The Wirecutter's Senior Autos Editor (and former Autoblogger) John Neff agrees. "As bold as it looks from the outside, he's really making a safe bet that their money is better spent on designing better and building more crossovers and trucks. He's probably right about that." But according to Jessica Caldwell, Executive Director of Strategic Analytics at Edmunds, "FCA's strategy of eliminating the Dart and 200 might be short-sighted if gas prices were to rise and Americans, once again, flocked to small vehicles. FCA must have plans to expand the lineup of small SUVs and position them as small-car alternatives in terms of price and fuel efficiency for this strategy to make sense." FCA's latest announcement focuses mainly on the profitable brands and nameplates. There's hardly a mention of Chrysler, Dodge, or Fiat. And future planning is where the plot holes appear. This realignment cuts dead weight from the product portfolio, but FCA's latest announcement focuses mainly on the profitable brands and nameplates. There's hardly a mention of Chrysler, Dodge, or Fiat. So what's Sergio up to? David Sullivan of AutoPacific thinks Marchionne is still looking for another CEO to hug.