Slt Truck 3.7l Cd 4 Speakers Am/fm Cd Mp3 W/sirius Satellite on 2040-cars

Auto blog

Junkyard Gem: 1988 Dodge Aries America LE Station Wagon

During the late 1970s, Chrysler appeared doomed as outdated car designs and a second catastrophic oil crisis caused by Middle Eastern conflict hammered sales. Chrysler had some successful economy cars made by Mitsubishi or based on Simca designs, but the need for an efficient, modern front-wheel-drive platform grew desperate. After a government bailout in 1979 bought some time, CEO Lee Iacocca masterminded the creation of the all-new K Platform, which hit showrooms for the 1981 model year. The first two K-Cars, the Plymouth Reliant and Dodge Aries, were big sales successes, and Chrysler went on building vehicles based on the platform through 1995. Here's an example of the later Aries wagon, found in a Phoenix self-service wrecking yard. The "true" K-Cars were the Aries, the Plymouth Reliant, the Chrysler LeBaron, and the Dodge 400. They have become very rare in wrecking yards today, so I honor their historical significance by documenting the ones I find. During my junkyard expeditions, I have photographed this '81 Aries wagon, this '81 Reliant wagon, this '82 Aries wagon, this '82 400 coupe, this '82 LeBaron convertible, this '83 Aries sedan, this '83 LeBaron Town & Country wagon, this '85 LeBaron woodie convertible, this '86 Aries sedan, this '86 LeBaron Town & Country wagon, this '86 Reliant wagon, and this '89 Reliant coupe. The early K-Cars could be purchased with optional Mitsubishi Astron 2.6-liter four-cylinder (complete with "HEMI 2.6" badging), but in 1988, the choices were down to a 93-horsepower 2.2-liter Chrysler-built four-cylinder or a 2.5-liter version of the same engine rated at 96 horses and 13 extra pound-feet of torque. This car has the 2.2. The "America LE" trim level was the only one available for the 1988 Aries, and it resulted in a fairly Spartan car. Tough, scratchy cloth upholstery and lots of hard plastic were the order of the day. The MSRP on this car started at $7,695, or about $16,770 in 2018 dollars. That's a lot of car for that kind of money. For comparison, the rear-wheel-drive (and much bigger) 1988 Pontiac Safari wagon went for nearly twice that price. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. By 1988, the Aries wagon was looking pretty old, but it was a bargain.

QB says University of Alabama offered him a Corvette to play football

The University of Alabama Crimson Tide football team could be in some hot water, following a pair of posts on social media.
The first post was sure to raise a few eyebrows on its own. It's an Instagram of sophomore running back Derrick Henry standing in front of his new Dodge Challenger (we're guessing it's an R/T based on the fender stripes). Complete with a custom set of wheels, the image was enough to trigger more than a few questions about where an unemployed student-athlete came up with the money for such a purchase. Now, this could be harmless. Henry, flush with a full-ride to Bama could have convinced his parents to get him something nice with his college fund.
The second post, though, is a straight-up accusation. It comes from former West Virginia Mountaineer and current CFL quarterback Pat White, who posted the following on his Facebook page.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat