57 Dodge Coronet " One Of The Finest " on 2040-cars

Auto blog

2019 Dodge Challenger R/T Scat Pack Widebody Drivers' Notes | Widebody for everybody

The 2019 and soon to be 2020 Dodge Challenger R/T Scat Pack Widebody is another Challenger dart thrown against the wall by Dodge. It takes the desirable Widebody package we’ve seen on Hellcats and applies it to the naturally aspirated Scat Pack with the 6.4-liter V8. This kit includes stiffer adaptive shocks, stiffer springs, larger stabilizer bars, big Brembo brakes, a 3.09 rear axle ratio, 20-inch forged wheels and massive 305 section-width tires on all four corners. Most important of all, you get the special Widebody fender flares that give the car its signature look. The package is $6,000 on top of a regular Scat Pack. That means the cheapest youÂ’ll step into a Scat Pack Widebody is $46,740. The Widebody that rolled through our offices came in at a much-higher $57,295 after a number of options were tacked on. Many of these, you can skip. The 485 horsepower and 475 pound-feet of torque that comes standard is the most important aspect of this big coupe. Several packages costing more than $1,000 each add convenience and driver assistance tech, and the Harman/Kardon system is a hefty $1,595. With such a loud engine and exhaust, itÂ’s hardly worthwhile. Our tester also had the $1,595 eight-speed automatic transmission. ThisÂ’ll let you scare unsuspecting bystanders with the remote start system, but opting for a manual is an easy way to save some cash and increase driver involvement. With all the modern technology like adaptive cruise control, auto high-beams, heated and cooled seats, and blind-spot detection, the Challenger tries its best to keep up with the times. ItÂ’s no technological marvel, but itÂ’s neat to see some of these options available for folks who might want them. Still, tech gizmos are not what the Widebody is about. This Challenger keeps the same personality as all of those before it, but adds a dash of handling and hostility to its outward appearance. Here are our varied experiences with it during a week of testing. Editor-in-Chief, Greg Migliore: Yes, you can put a rear-facing convertible car seat in a Dodge Challenger. I did. It actually wasnÂ’t that hard. Remember, the Challenger is genetically a Mercedes sedan and shares underpinnings with the Dodge Charger. The biggest hurdles are ingress and egress, which is to be expected in any coupe. The roofline is low, but really not that bad. I simply lifted my toddler and maneuvered him into the backseat.  I was able to get him secured and fastened, and then I just stepped out of the car.

Dodge and Jeep recalling 895k SUVs for possibility of headliner fires

Dodge and Jeep are announcing recalls of a total of 895,000 Durango and Grand Cherokee models worldwide from the 2011 through 2014 model years. There's a possibility that the wiring in the sun visor can short circuit and cause a fire. It specifically affects vehicles built between January 5, 2010, and December 11, 2013, and there are approximately 651,000 of them in the US, 45,700 in Canada, 23,000 in Mexico and 175,000 outside of North America.
Screws that fasten the sunvisor to the headliner may pierce wires in the visor, if the part has been removed or serviced, potentially causing a fire risk. If the wires short circuit, they could overheat and potentially combust. The automakers report three injuries caused by this defect, and according to the investigation by the National Highway Traffic Safety Administration, "there may be a total of 52 unique fire incidents."
To fix the problem, Dodge and Jeep will inspect the vehicles for suspect wiring, and all of the models, whether damaged or not, will get a new sun visor spacer with a wire guide to stop the possibility of short circuits. According to the automakers' announcement, "this condition is not present in vehicles which have not had the headliner or vanity mirror serviced." They will notify affected owners, and repairs will begin in August.

Dodge says three new variants of the Charger and Challenger are on their way

Introduced in 2008, the current Dodge Challenger is one of the oldest new cars on the American market. It's not ready to retire, and documents published by Canadian union Unifor confirm it will remain in production until at least 2023. Better yet, the company announced it will release several new versions of the car in the coming years. Fiat-Chrysler Automobiles (FCA) narrowly avoided a costly strike by signing a new three-year agreement with Unifor, the union that represents most of its Canadian workers. It pledged to inject $1.58 billion Canadian (about $1.2 billion U.S.) into its local operations while creating 2,000 new jobs in the nation. Some of that money will be allocated to the Brampton Assembly factory located on the outskirts of Toronto, where it will be used to build three new variants of Dodge's Charger and Challenger models. Details about what the company has in store weren't included in the release, but Dodge has shown it's capable of mustering an unusually high level of creativity when it comes to keeping the Challenger and the Charger fresh. Hellcat, Demon, T/A 392, and Super Stock models have joined the range in recent years, and its efforts have paid off, as 60,997 units of the Challenger were sold in the United States in 2019. It even outsold the Camaro and the Mustang during the third quarter of the year. Annual Charger sales jumped by 21% to 96,935 units in 2019. With that said, Dodge's definition of a new variant is murky. It could be alluding to a trim level, an option package, a limited-edition model, or a face-lifted version. Regardless, we're betting they'll be exceptionally powerful. Chrysler will continue to build the 300 in Brampton through 2023, too, but there's no word on what the future has in store for the sedan. It's also relatively old, but it's not faring nearly as well as its Dodge-badged siblings. Sales fell to 29,213 units in 2019, a 37% drop compared to 2018, and the lineup was pared down for 2021. Moving west, the Windsor factory will be retooled to build plug-in hybrid and electric vehicles, and it will be assigned at least one new model, but FCA didn't reveal what it will be, or when we'll see it. Industry whisperings claim that's where the production version of the CES-friendly Chrysler Portal concept will be built.