1965 Dodge Coronet Wagon on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Autoblog Podcast #402

Episode #402 of the Autoblog Podcast is here, and this week, Dan Roth, Steven Ewing, and Brandon Turkus talk about the Audi A3 TDI Challenge and luxury car features we not-so-secretly love. We start with what's in the garage and finish up with some of your questions, and for those of you who hung with us live on our UStream channel, thanks for taking the time. Check out the rundown below with times for topics, and you can follow along down below with our Q&A. Thanks for listening! Autoblog Podcast #402: The video meant to be presented here is no longer available. Sorry for the inconvenience. Topics: Audi A3 TDI road trip Luxury features we're sort of ashamed we love In The Autoblog Garage: 2014 Land Rover LR4 2015 Aston Martin Vanquish 2015 Dodge Challenger R/T Scat Pack Hosts: Dan Roth, Steven Ewing, Brandon Turkus Runtime: 01:17:40 Rundown: Intro & Garage - 00:00 Audi A3 TDI Challenge - 42:51 Luxury Features We Love - 01:00:05 Q&A - 01:09:17 Get the podcast: [UStream] Listen live on Mondays at 10 PM Eastern at UStream [iTunes] Subscribe to the Autoblog Podcast in iTunes [RSS] Add the Autoblog Podcast feed to your RSS aggregator [MP3] Download the MP3 directly Feedback: Email: Podcast at Autoblog dot com Review the show in iTunes Podcasts Aston Martin Audi Dodge Land Rover Diesel Vehicles Luxury Performance aston martin vanquish

Dodge Demon test mule spotted wearing unusual camouflage

The Dodge Demon apparently refuses to stay under wraps. The endless rollout of teasers continues each Thursday, but thanks to both Vin Diesel and our trusty spy photographer we have a whole suite of photos that show a nearly complete car in the flesh. This car appears to have been hiding in plain sight, as some of these photos were captured in the Detroit area. The car or cars in these photos is far less polished than the one shown in all of Dodge's teasers. The Air Grabber hood is unpainted, though it does come with some awesome hood pins. The same goes for the bolt-on fenders, as other pictures show a cleaner integration of the Demon's widebody modification. Despite the large Nitto logo on the top of the windshield, the cars in these photos are both wearing a set of Pirelli PZero All-season Plus tires on non-Demon wheels. It's as if drag radials aren't the best choice for winter driving. This car is fitted with two-piece Brembo brakes, but there's no telling if they're different than the standard Hellcat's. The decals on the side of the car may give clues to some of the Demon's equipment, but based on the LB Performance - commonly known as Liberty Walk- logo, the decals are likely more of a ruse than anything else. Liberty walk is famous in the tuning community for big, bolt-on body kits. The looks perfectly suit these test cars, though Borla exhaust and a Hurst shifter would be a wonderful addition to the Demon. Outside of that, there isn't much new to glean from these photos. Most of our questions about the Demon (horsepower, gearing, price) can't be had from pictures. Look for more news each Thursday in the lead up to the car's debut in New York in April. Related Video: Featured Gallery Dodge Demon Spy Shots View 14 Photos Related Gallery Dodge Demon Teasers View 17 Photos Image Credit: KGP Photography Spy Photos Dodge Coupe dodge hellcat