1951 Dodge Coronet Base 3.8l on 2040-cars

Auto blog

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.

Stellantis reveals STLA Large platform with EV and ICE support

Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.

Dodge, Jeep and Ram could soon be owned by Chinese automakers

For the past several years, Fiat Chrysler CEO Sergio Marchionne has made it widely known that the automaker he helms is up for grabs. First, he sent an email to GM CEO Mary Barra, who immediately refused to even discuss a merger. Later, Marchionne set his sights on Volkswagen. That too was swiftly rebuffed. It seemed like no global automaker was remotely interested in a partnership. Now, Automotive News reports that several Chinese automakers have come calling, only FCA isn't ready to answer. At least not yet. The news broke this morning that a major Chinese automaker had made an offer to purchase FCA for slightly above market value. FCA refused, saying the offer wasn't quite generous enough. It's unclear which automaker made the offer, but Automotive News says there's more than one interested party. FCA representatives have recently traveled to China to meet with Great Wall Motors, while Chinese representatives were seen at FCA corporate headquarters in Auburn Hills, Mich. The Chinese government has a lot of money invested in local automakers. It's putting pressure on these automakers to expand globally, including to the United States. As it stands, it's a matter of when a Chinese automaker will start selling cars here, not if. Purchasing an established automaker with a wide range of products and a huge dealer network would do wonders in giving the Chinese a foothold here. Sure, Geely owns Volvo, but a luxury automaker doesn't have nearly as much reach as a more mainstream company like FCA. This seems like the best case scenario for both a Chinese automaker looking to move into the U.S. and for FCA, at least from a business standpoint. The latter doesn't seem to have any other interested parties. It will be interesting to see how FCA would sell a deal like this to the public. We're not sure everyone will be happy with Dodge, Jeep and Ram falling under Chinese ownership. FCA didn't turn down the Chinese because they didn't like the idea. It turned down the offer because there wasn't enough money on the table. Related Video: News Source: Automotive News Earnings/Financials Alfa Romeo Chrysler Dodge Fiat Jeep RAM