Srt8 Super B 6.4l Cd Rear Wheel Drive Power Steering Abs 4-wheel Disc Brakes on 2040-cars

Auto blog

Dodge Challenger SRT Demon TransBrake eliminates the need for brake torquing

Performing the perfect launch is key to drag racing. In order to get consistent starts, the engineers behind the Dodge Demon developed TransBrake, a system that holds the output shaft of the automatic transmission to keep the vehicle stationary until launch. Rather than the traditional method of two-foot brake torquing, the system is triggered by pulling the shift paddle for quick and consistent launches. According to Dodge, the main benefit of TransBrake versus a two-foot setup is a quicker power delivery and higher engine launch torque potential. The system gives brake-free launches up to 2,350 RPM, a 105-percent increase in launch boost pressures, and a 120-percent increase in engine launch torque. Dodge also claims that using the paddle provides a 30-percent better reaction when compared to using your feet. In addition to shifting duties from your feet to your hands, the Demon's TransBrake will preload the driveline. Torque is loaded at the wheels, not the transmission. That means full torque delivery 150 milliseconds after the shift paddle is released. It should also help reduce the driveline shock that occurs when those 315 section rear tires get near-instant grip. The reveal is coming near. Continue checking out Autoblog and ifyouknowyouknow.com every Thursday until the New York Auto Show. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. New York Auto Show Dodge Coupe Performance drag racing dodge demon dodge hellcat drag strip

Dodge says three new variants of the Charger and Challenger are on their way

Introduced in 2008, the current Dodge Challenger is one of the oldest new cars on the American market. It's not ready to retire, and documents published by Canadian union Unifor confirm it will remain in production until at least 2023. Better yet, the company announced it will release several new versions of the car in the coming years. Fiat-Chrysler Automobiles (FCA) narrowly avoided a costly strike by signing a new three-year agreement with Unifor, the union that represents most of its Canadian workers. It pledged to inject $1.58 billion Canadian (about $1.2 billion U.S.) into its local operations while creating 2,000 new jobs in the nation. Some of that money will be allocated to the Brampton Assembly factory located on the outskirts of Toronto, where it will be used to build three new variants of Dodge's Charger and Challenger models. Details about what the company has in store weren't included in the release, but Dodge has shown it's capable of mustering an unusually high level of creativity when it comes to keeping the Challenger and the Charger fresh. Hellcat, Demon, T/A 392, and Super Stock models have joined the range in recent years, and its efforts have paid off, as 60,997 units of the Challenger were sold in the United States in 2019. It even outsold the Camaro and the Mustang during the third quarter of the year. Annual Charger sales jumped by 21% to 96,935 units in 2019. With that said, Dodge's definition of a new variant is murky. It could be alluding to a trim level, an option package, a limited-edition model, or a face-lifted version. Regardless, we're betting they'll be exceptionally powerful. Chrysler will continue to build the 300 in Brampton through 2023, too, but there's no word on what the future has in store for the sedan. It's also relatively old, but it's not faring nearly as well as its Dodge-badged siblings. Sales fell to 29,213 units in 2019, a 37% drop compared to 2018, and the lineup was pared down for 2021. Moving west, the Windsor factory will be retooled to build plug-in hybrid and electric vehicles, and it will be assigned at least one new model, but FCA didn't reveal what it will be, or when we'll see it. Industry whisperings claim that's where the production version of the CES-friendly Chrysler Portal concept will be built.

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.