Repaireable Rebuildable Salvage Lot Drives Great Project Builder Fixer Rear Hit on 2040-cars

Auto blog

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

2020 Dodge Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition celebrates an icon

Fifty years ago, Dodge commissioned Creative Industries to build the 1969 Dodge Charger Daytona as a homologation special to satisfy NASCAR rules. The extraterrestrial-looking coupe conquered at the race track, broke records, and frightened any onlooker possessed of a weak constitution; it's claimed that even the carmaker's general manager at the time, Bob McCurry, considered the Charger Daytona the ugliest car he'd ever laid eyes on. Time having worked its magic, Dodge is celebrating the now-iconic Winged Warrior with the 2020 Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition. The new model goes without a nose cone and vertical stabilizers, but it does loose 717 horsepower from its 6.2-liter supercharged V8, which is 10 more than the standard car. The grunty sedan will be available in four colors: Pitch Black, Triple Nickel, White Knuckle, and B5 Blue exclusive to this model. B5 was the original paint code for a Blue Fire Poly hue available on Dodge and Plymouth products built between 1969 and 1972. Evoking the original as well as highlighting the decklid spoiler on the new Charger, the black, nickel, and blue sedans get white "Daytona" decals on the rear quarter panels and a white spoiler, matching white Hellcat badges on the front fenders. White cars get blue "Daytona" decals and spoiler, and Hellcat badges in a bright finish. Twenty-inch Warp Speed wheels finished in Satin Carbon on all-season Pirellis and black Brembo brakes complete the exterior overhaul. Inside, heated and cooled 12-way adjustable performance seats are trimmed in Nappa leather and Alcantara, with blue cross-stitching joining seatbacks embroidered with the word "Daytona." The flat-bottomed, suede-wrapped steering wheel with silver stitching and "velour-bound" floor mats will only come in this model, the festival of special appointments also including the dynamica suede headliner, carbon fiber instrument panel and bezels, light black chrome trim pieces, and blue stitching on the dash, shifter, center console armrest, and door panels. Dodge will only produce 501 units, said to match the number of cars necessary for NASCAR homologation at the time, and each wears a plaque identifying it as "X out of 501." NASCAR rules in 1969 demanded 500 units, actually — the car Dodge built in 1968 to race was called the Charger 500, in fact. Also, Creative Industries built 503 1969 Charger Daytonas for the U.S. and another 40 for Canada, but who's counting?

Dodge adds fire-breathing Durango SRT for 2018

The playbook for Dodge right now is pretty simple. Wring as much power out of as many things as humanly possible. Now comes the 2018 Dodge Durango SRT. Packing 475 horsepower and 470 pound-feet of torque, this seven-seat school bus will scoot to 60 miles per hour in just 4.4 seconds. Since the latest Durango launched for 2014, Dodge has unabashedly called it a three-row Charger. This beefy SUV makes that aggressive claim even more legit. "It does all the things we want a performance car to do," says Mark Trostle, head of performance, passenger, and utility vehicle exterior design. "It really is our three-row Charger." The 6.4-liter (392 cubic inches) Hemi V8 is considerably stronger than the already-potent 5.7-liter Hemi V8, which is rated at 360 hp and 390 lb-ft in the most powerful Durango available now. The SRT powertrain includes the TorqueFlight eight-speed automatic transmission used in the lesser Durango models (and many other FCA US vehicles), though it's calibrated specifically to the sportier demeanor of the SRT model. A similarly retuned full-time all-wheel-drive system rounds out the powertrain. Despite the fact this is a hot-rod SUV, it can still tow 8,600 pounds with a trailer, 1,200 pounds more than the most capable 2017 Durango (the rear-wheel 5.7-liter variant). View 9 Photos The Durango SRT is an obvious move for Dodge. The Jeep Grand Cherokee, which is built on the same platform in the same factory in Detroit, already has an SRT model. With rumors of a Hellcat-powered Grand Cherokee swirling and another Demonic Challenger on the way, the Durango was overdue for an engine upgrade. "When we launched the Durango in 2014, this is the one we really wanted," says Tim Kuniskis, head of FCA US' passenger car brands. There's no doubt this is an enthusiast-oriented SUV. Dodge even went to the trouble of certifying the Durango SRT's 12.9-second quarter-mile time with the NHRA and tested it a Virginia International Raceway. Buy a Durango SRT, and you get a full day at the Bob Bondurant School of High Performance Driving. When's the last time anyone did all of that with a three-row ute? It certainly looks the part. The hood bulges with new air-ducts to help keep the big Hemi chilled appropriately. There's a new front fascia with more air vents and LED fog lamps. Plus, the grille takes on a menacing new glare with a mesh pattern, and the body gets wider wheel flares. Click through the gallery, it really does look like a Charger from some angles.