Push Start Mp3 Alloy Wheels Power Seat Cruise Control Dual Air Bags on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Driving the 2019 Dodge Durango Pursuit | Bells and whistles, lights and sirens

Recently, we went to the FCA proving grounds in Chelsea, Mich., to test out the company's 2019 model-year lineup. There are a lot of cars to choose from, and only a limited time to drive them, so since we couldn't drive the Dodge Challenger SRT Hellcat Redeye (that drive is coming soon, though) naturally we gravitated to the flashiest, noisiest one: the 2019 Dodge Durango Pursuit police vehicle. This is the first time the Durango is being offered as a cop car, and there are a number of features that make it fit for service. All Durango Pursuit models feature all-wheel drive, and it's available with two different engines. The standard motor is the 3.6-liter Pentastar V6, providing 293 horsepower and 260 pound-feet of torque. The tester we got to drive, though, was equipped with the 5.7-liter hemi V8, good for 360 horsepower and 390 pound-feet of torque. It also has a load-leveling performance suspension, which really helped out when we tossed it around the handling course. It has 8.1 inches of ground clearance, which means it can get to scenes off the beaten path. As much as we loved driving it, we had the most fun just playing with the lights and sirens of the Durango Pursuit. Standing outside the vehicle, the sirens and horn are incredibly loud, enough to make bystanders jump in fright. Dodge did a good job with the sound deadening, though, and the sustained wail wasn't bothersome when chasing imaginary suspects around the test track. One feature we didn't get to test out, but important to police duty, was the special Uconnect system in the Durango Pursuit. More than just an infotainment system, the seven-inch display is equipped to integrate various law enforcement systems. Another cool detail about the car, its tri-zone climate system is ideal for K9 units, with the ability to set separate HVAC settings for the dogs in the back of the car. Check out the video above, and stay tuned for more videos to come from our time spent at FCA's Chelsea proving grounds. Related Video: Dodge Crossover SUV Police/Emergency Special and Limited Editions Videos FCA

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video: