One Of A Kind 2012 Dodge Charger Srt8 on 2040-cars

Auto blog

Junkyard Gem: 1981 Dodge Challenger

The first Dodge Challenger was an E-Body sibling to the 1970-1974 Plymouth Barracuda, and it was a pure Chrysler product with either Slant-6 or V8 power. Then stuff happened and the Challenger name went away for a while, returning in 1978 on a rebadged Mitsubishi Galant Lambda. For 1981, the Challenger got an updated body, and that's what we've got here in a Denver-area self-service wrecking yard. Chrysler was selling lots of Mitsubishis by the early 1980s, including the Colt econobox, the Dodge Ram 50 pickup, and the Plymouth Arrow truck. The Challenger's Plymouth-badged sibling was the Sapporo. This one had a bunch of late-1990s receipts from Los Angeles-area shops, and a check of the VIN on the California smog-check database shows that it last passed the Golden State's emissions test in 1997. Did it drive to Colorado 20 years ago and then sit until a few months ago? There is no easy way to know. Early Mitsubishi-built Challengers could be had with a 1.6-liter four-cylinder engine, but in 1981 the only engine choice was the Astron 2.6 four-banger, rated at 105 horsepower. Members of the Astron 2.6 family powered everything from Dodge Aries-Ks to Mitsubishi Starions in North America, and production continued nearly into our current century for Chinese-market trucks. Not many miles on this car, and no rust. The Index of Effluency-winning team at the recent Colorado 24 Hours of Lemons race grabbed a few bits from this car for their somewhat related 1976 Plymouth Arrow, but otherwise it appears that this rare classic may go to the crusher more or less intact. It's a lightweight, rear-wheel-drive coupe with decent power (for its era) and a 5-speed manual transmission, but there's just not much of a following in Colorado for these cars. I see the occasional Sapporo or Challenger during my junkyard travels, but the numbers have declined in recent years. Soon they will all be gone. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Related Video: Featured Gallery Junked 1981 Dodge Challenger View 26 Photos Auto News Dodge Automotive History Coupe Performance

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.