2013 Dodge Charger R/t Max! Nav! Sunroof! Low Miles!! on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Does the future of Fiat-Chrysler include Dodge?

Wards Auto reports the future of Dodge is looking uncertain. Fiat has more or less laid out it's game plan for the next few years, and while the Chrysler, Fiat and Jeep lines are set to receive plenty of love, Dodge isn't so lucky. Fiat has already hobbled Dodge significantly by splitting off the brand's trucks into a separate Ram line.
Wards says that after the Avenger rides off into the sunset early next year, Fiat-Chrysler won't replace the model, leaving a gaping midsize hole in the Dodge lineup. The report also cites unnamed sources as saying that at least two other current Dodge products will move to the Chrysler line.
One of those could very well be the Grand Caravan. Chrysler has already made it clear that it plans to trim redundancy between its minivan offerings, but it has yet to clarify which other vehicle could sail under the Chrysler banner moving forward. Either way, such changes to the product line would theoretically leave Dodge with just four models.

Dodge Challenger ADR prototypes spied with massive rubber

In an effort to give the Dodge Challenger one last hurrah before making the switch to the Giorgio platform in 2018, Automotive News reports that the automaker will come out with the Challenger ADR. The ADR, which stands for American Drag Racer, is expected to be a wide-body, Hellcat-powered variant that is closely based off of the current model. The report seems to have merit, as photographers have captured Challenger prototypes testing with massive tires. The prototypes look extremely similar to the current Challenger SRT Hellcat with the same hood scoop, front fascia design, rear spoiler construction, and rear end. The white and purple vehicles, though, are wearing extremely wide tires. The extra-wide rubber on the prototypes appear to have a similar tread design as the ones found on the Dodge Viper ACR, which features the grippy Kumho Ecsta V720. While the ACR wears 295 mm tires at the front, the car's rear tires are massive at 355 mm. The tires found on the prototype don't appear to be as large as the ones found on the ACR, but are expected to be larger than the current Challenger SRT Hellcat's, which are Pirelli P Zero Neros measuring 275 mm at all four corners. The Challenger ADR, with its wider, stickier tires is expected to cater to drivers that are looking to put all of the supercharged 6.2-liter V8's power to the ground. The rear-wheel-drive ADR is expected to come with a wide-body kit, which is missing from the prototypes. The Hellcat-powered, wide-body Challenger ADR is expected to make an appearance later in 2017, with an all-wheel-drive model (sans Hellcat engine) known as the GT AWD following closely thereafter. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Dodge Challenger ADR Spy Shots View 16 Photos Spy Photos Dodge Coupe Performance prototype testing dodge challenger srt hellcat