2013 Dodge Charger Like New We Finance 1.99%!! Free Shipping!! on 2040-cars

Auto blog

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video:

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.

Dodge could resurrect the ACR nameplate on a track-hungry Challenger

Dodge will reportedly celebrate the Challenger's 50th birthday by introducing a track-focused variant of the coupe that will resurrect the American Club Racer (ACR) nameplate. It will arrive as a cocktail of the automaker's best race-bred parts, including bits and pieces sourced from the defunct Viper. The Challenger ACR will be presented as a follow-up to the sold-out Challenger Demon available during the 2018 model year. While Dodge developed the 840-horsepower Demon for drag racing, it's designing the ACR to tackle America's windiest road courses, according to anonymous sources who spoke to website Mopar Insiders. It will need to take a turn, not just go really fast in a straight line. To that end, Dodge will give its popular muscle car more downforce by adding a full body kit that will include a huge adjustable rear wing shaped like the one fitted to the Viper ACR. The racer will be based on the Widebody variant of the Challenger, which handles considerably better than its narrow-bodied sibling, and it will rely on composite materials like carbon fiber to keep weight in check. In other words, it will receive more extreme modifications than the Challenger SRT8 ACR that Dodge introduced during the 2011 SEMA show but never approved for production. If this configuration sounds familiar, it's likely because the carmaker sponsors an independent team named Wesley Motorsports, which races a Hellcat Redeye all over America. It features an adjustable suspension provided by Blistein, slick Toyo tires, and a supercharged, 797-horsepower V8. The Challenger ACR described by Mopar Insiders sounds a lot like the one Wesley Motorsports regularly enters in hill climbs and time attack competitions (pictured). Coincidence? It's too early to tell for sure. Dodge hasn't commented on the report, and it hasn't announced what it has in store for the Challenger's 50th anniversary. The original Challenger made its debut in late 1969, and it arrived in showrooms during the 1970 model year, so Dodge will need to unwrap its surprise before the start of the 2021 model year to keep it timely. Expect an announcement during the first half of 2020. While pricing information remains a mystery, Mopar Insiders added the Challenger ACR will come standard with only a driver's sat. Buyers will be able to add a passenger seat for $1.