2011 Dodge Charger R/t on 2040-cars

Auto blog

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video:

NHTSA investigating Ram 1500 models for rear differential failure

The National Highway Traffic Safety Administration is investigating Fiat Chrysler Automobiles and its Ram brand following a number of reports regarding the 2005 Dodge Ram 1500 pickup. According to 15 consumer complaints, the trucks' rear differential locked up while in other cases, the driveshaft separated at its connection to the diff.
Nearly half of the reports claim the truck was traveling at or above 50 miles per hour, while two consumers reported that the diff lockup/driveshaft separation sent their pickups into a spin. Most troubling, though, is that consumers reported little to no sound indicating there was a problem with their truck.
We reached out to Ram for additional information, such as how many vehicles may be affected or what equipment might be fitted that could cause the issue. Unfortunately, the company wasn't willing to elaborate on specifics.

Junkyard Gem: 1991 Dodge Monaco LE

When Chrysler took over the American Motors Corporation in 1987, the hot-selling Jeep brand was the big prize of that deal. At a stroke, Iacocca's company got the XJ Cherokee (which remained in production into our current century) plus its Comanche pickup sibling, the Wrangler, the Grand Wagoneer, and the AMC Eagle as bonuses. The Eagle gave its name to Chrysler's new marque, which worked out well for quite a few years, and of course the PowerTech V8 engine began life as an AMC design. Yes, Chrysler made out like a bandit on the AMC purchase, but one of the most important acquisitions that came with that coup ended up being a Renault design from the last gasp of Kenosha: the Eagle Premier. Genetic material from this car made its way into Chrysler products for decades to come, and the Dodge Division got the opportunity to slap Monaco badges on the Premier for the 1990 through 1992 model years. Here's one of those super-rare cars in a Denver self-service yard. Dodge sold plenty of Detroit-designed Monacos from the 1965 through 1978 model years, and so the name seemed ripe for a revival in 1990. We rated the 1974 Dodge Monaco "Bluesmobile" #3 on the Best Movie Cars of All Time list, and Monacos may be found in countless cop movies and TV shows over the decades. Did the name belong on a Renault design? Absolutely! The radical-looking and big-selling Chrysler LH cars were built on a modified Eagle Premier chassis, enabling Chrysler to print money from a 1980s Renault design all the way through 2004. After that, Mercedes-Benz engineering (with a dash of Mitsubishi thrown in for good measure) got stirred into the mix, but I'm told by a Chrysler engineer that you can still see the Renault 25 structure beneath the dashboard in modern Challengers and Chargers. All of this comes thanks to Lee Iacocca's score of that advanced European car way back in 1987. One thing from the Premier that Chrysler dropped like a monkey dropping a red-hot penny once production of the Premier/Monaco ended: the PRV V6, a sophisticated-but-flaky overhead-cam V6 originally developed by a partnership between Peugeot, Renault, and Volvo (hence the acronym). This engine achieved its greatest fame as the powerplant that went into the DeLorean DMC-12. You could get the chugging AMC 2.5-liter straight-four in the Eagle Premier, but all the 1990-1992 Monacos got the 3.0-liter PRV, rated at 150 horsepower.