2006 Dodge Charger R/t Sedan 4-door 5.7l on 2040-cars

Auto blog

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

Sunday Drive: Spying an automotive future of performance

I spy, with my little eye ... the future of the automotive world here in the United States. That pretty much sums up this week's Sunday Drive, in which we pull out the most popular stories on Autoblog of the previous week and try to draw some sort of conclusion as to what binds them all together. This week, it's spy shots, starting with one of the biggest and baddest muscle cars the world has ever seen: the Dodge Challenger Hellcat. The Hellish coupe gets a new hood for 2019 with dual scoops, but that's about the only meaningful change for the new model year. No matter. As long as it's packing 700-plus horsepower under those two hood scoops, all will be right with the world. Moving on, we take keep the performance angle but move it from the street to the dirt with a new version of the Chevy Colorado ZR2 that we think is probably called the Bison. We think it'll keep the high-tech suspension bits of the regular ZR2, but add expedition gear that may include a snorkel and a winch. Which, if true, is pretty dang cool. Keeping the truck theme is the 2019 GMC Sierra. There's nothing particularly noteworthy about the trim level in which the truck was spied, and that's what makes this specific example interesting. Base-model trucks almost never get much attention, but they sell in droves to workers who need an honest-to-goodness truck for work or play and don't care about bells, whistles, or massive chrome badges. And finally we have the 2018 Jeep Wrangler, which is on fire on the sales floor right now. But those are all V6-powered Wranglers flying off the showroom floor. Soon, a turbocharged four-cylinder engine option will become available, and now we know that it will return up to 23 miles per gallon in the city and 25 on the highway. That makes it the most fuel efficient Wrangler that Jeep has ever sold. As always, stay tuned to Autoblog this week for all the automotive news that's fit to publish. 2019 Dodge Challenger Hellcat with twin-scoop hood spied with no camouflage Chevy Colorado ZR2 Bison caught testing 2019 GMC Sierra 1500 spied in base trim level 2018 Jeep Wrangler four-cylinder fuel economy revealed Spy Photos Chevrolet Dodge GMC Jeep Truck Coupe SUV Off-Road Vehicles Performance dodge challenger srt hellcat sunday drive

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.