11 Charger Se, 3.6l V6, Auto, Cloth, Alloys, Cruise, Clean, We Finance! on 2040-cars

Auto blog

2019 Dodge Challenger SRT Hellcat Redeye is the Demon spawn

The Demon has passed from us, but the Demon's spawn are here, so please allow them to introduce themselves. A new demi-Demon trim level has been anointed as the 2019 Dodge Challenger SRT Hellcat Redeye. Plus there's an updated Challenger SRT Hellcat and new Challenger R/T Scat Pack Widebody. Like with the Charger introduced this morning, they have inherited some of the best parts from the Demon. The Hellcat Redeye is possessed by the Demon's howling supercharged 6.2-liter Hemi, making 797 horsepower and 707 pound-feet of torque. Dodge proclaims it the "most powerful production V8" and "quickest production muscle car," with a 0-60 time of 3.4 seconds and quarter-mile time of 10.8 seconds at 131 mph. Top speed: 203 mph. Dodge can claim these superlatives, of course, because the 840-horsepower Demon's limited production run has ended. The Hellcat Redeye's Hemi is paired with an eight-speed automatic. Dodge says the powerplant gets 25 major component upgrades, including a larger supercharger (2.7 liters, up from 2.4) with higher boost pressure (14.5 psi, up from 11.6), strengthened connecting rods, pistons and valve train, high-capacity fuel injection system and improved lubrication. It gets a second fuel pump and a higher redline of 6,500 rpm. Theoretically, if you were someplace where you could operate at full throttle without letting up, Dodge says the Hemi would drain the fuel tank in under 11 minutes. Yet the car gets a 22 mpg highway rating from the EPA. View 30 Photos It also has the Torque Reserve system that starts building boost before launching, as well as the air conditioned intercooler to provide extra cool intake air. Both of these were features in the Demon. Furthermore, if the standard 2.62:1 final ratio isn't quick enough for you, Dodge offers a 3.09:1 rear axle. The Challenger SRT Hellcat Redeye also comes with the Demon and Hellcat Widebody's fat fender flares. It's an unsurprising inclusion, since you'll want as much tire as possible for all that power. Now, a mere clear-eyed Challenger SRT Hellcat gets a 10-horse boost for 2019 to 717 horsepower, and a smidge more torque at 656 pound feet. A six-speed manual transmission is standard, and an eight-speed automatic is an option. Both Hellcat models get the new dual-snorkel hood we've seen in spy shots. It's meant to evoke 1970s Dodge muscle cars. Dodge says the airflow from the hood alone reduces engine temperature by 4 degrees Fahrenheit.

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Dodge recalls 2011-2016 Charger to give owners wheel chocks

A bizarre new recall gives wheel chocks to Dodge Charger owners so that people remain safe while changing the sedan's wheels. The campaign covers 441,578 examples of the 2011-2016 Charger in the US; plus 19,229 in Canada; 4,969 in Mexico, and 38,947 outside the NAFTA region. According to Dodge's announcement, owners should use the chocks to stabilize the Charger when using a jack to change the wheels, like in the case of a flat tire. Without them it's possible for the sedan to fall off the jack. The company is aware of three minor hand injuries from this problem. Dodge will notify owners by mail when they can pick up the free wheel chocks. FCA US spokesperson Eric Mayne offered Autoblog a more detailed explanation about this recall. "The body structure of this vehicle is unique. If owner's manual instructions are not followed, slippage may occur. Chocks are being provided to help ensure the instructions are followed," he said. "We are continually analyzing warranty data to identify ways to improve the ownership experience. When tire-jack data was reviewed, we identified a need to further assist our customers." Statement: Wheel Chocks February 3, 2016 , Auburn Hills, Mich. - FCA US LLC is conducting a voluntary safety recall to supply wheel chocks for an estimated 441,578 full-size sedans in the U.S. The chocks are for use, as instructed in the vehicle's owner's manual, when employing a tire jack to change wheels. When positioned diagonally opposite to the wheel being changed, the chocks will help stabilize the vehicle. Failure to follow the manual's instructions with an affected vehicle may cause the vehicle to come off the tire jack. FCA US is aware of three related injuries – all minor. The recall is limited to 2011-2016 Dodge Chargers. Also affected by the campaign are an estimated 19,229 cars in Canada; 4,969 in Mexico and 38,947 outside the NAFTA region. Recall notices will advise affected customers when they may obtain their wheel chocks, which will be supplied free of charge. Customers with questions or concerns may call the FCA US Customer Care Center at 1-800-853-1403.