Srt8 392 Manual Coupe 6.4l Cd Locking/limited Slip Differential Rear Wheel Drive on 2040-cars

Auto blog

Watch Jay Leno drive an ex-highway patrol '61 Dodge Polara

The latest vehicle to swing by Jay Leno's Garage is a 1961 Dodge Polara. This one was used by the California Highway Patrol half a century ago, ordered specially by the state police instead of the Darts that were usually used by law-enforcement. After sitting out in the sun for a few decades, it recently underwent a comprehensive, ground-up restoration by the historians and craftsmen at the Automobile Club of Southern California. As you can see for yourself, the result of the restoration is really quite stunning. The ACSC apparently spared no expense, bringing the 413-cubic-inch V8 back up to working order, along with the emergency lighting, radio, certified speedometer... the works. In the process they even found the engine cranked out more than the factory quote of 325 horsepower, recording 332 hp and 406 pound-feet of torque on the dyno. The Polara CHP cruiser hadn't even been back out on the freeway since the restoration was finished. But after getting the full run-down from the guys responsible for its resuscitation, Jay wasted little time in bringing it back to its natural habitat.

Ringbrothers 1969 Dodge Charger Defector is a mean green machine

The 1969 Dodge Charger is one of the most recognizable cars ever built. Its debut at the peak of the muscle car era, sleek bodywork, and roaring Hemi V8 represented everything that was wonderful about American cars from the 1960s. It was fast, loud and moved like a greyhound off the line in search of that mechanical lure. Ringbrothers, the shop behind cars like the De Tomaso Pantera "ADRNLN" and t he Chevy Chevelle "Recoil," have unveiled its latest project - the 1969 Dodge Charger "Defector". Like most Ringbrothers projects, a first glance doesn't show much more than some wheels, new paint and a different ride height. Like any good custom car, the devil is in the details. The Defector falls into the restomod category, meaning it has classic looks but has been updated with modern parts and technology. This is the first time the shop has done a Mopar product, and they wanted to knock it out with the first attempt. While it may look stock, the bodywork has been significantly altered. Compared to a standard '69 Charger, the trunk lid is two inches shorter and the wheelbase has been increased by three inches. That means the car has new rockers and new quarter panels. The car was then painted in a BASF color called "Greener On The Other Side." It wears a black vinyl roof and a black stripe around the rear. The stripe and grille both sport the Ring Brothers logo. The car rides on 19-inch HRE wheels and uses Baer brakes with six-piston front calipers. The new rear subframe comes from Detroit Speed. The ancient steering rack has been replaced with a new rack and pinion unit. We assume this means it won't steer like a drunken hippo in a mudslide. Like the exterior, changes to the interior are subtle. It looks stock, but the seats wear new upholstery and the dash has been fitted with an Alpine stereo with a touchscreen display. The new steering rack is fitted with a nice Nardi steering wheel. The most modern update rests under the hood. In place of the old V8, Ringbrothers have swapped in a new 6.4-liter Hemi V8. It's the same one you'll find in any number of modern Mopar products. It's been tuned by Wegner Motorsports and exhales through a new Flowmaster exhaust system. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.