Leather & Suede Combo - Chrome 20s - Automatic on 2040-cars

Auto blog

Chrysler recalling 67k trucks with manual transmissions

Earlier this month, Chrysler announced the recall of some 280,000 pickup trucks over concerns that their axles could seize up. Now the automaker has announced an entirely separate recall of another 66,819 trucks over the springs that could break in the clutch ignition interlock switch. The recall affects Dodge Ram 1500, 2500 and 3500 pickups, as well as the Dodge Dakota and Mitsubishi Raider. The issue is relevant only to those trucks fitted with manual transmissions, from the 2006 and 2007 model years and manufactured between July 1, 2005, and July 31, 2006. Since a broken spring could, according to statements issued by the National Highway Traffic Safety Administration and FCA US LLC (previously known as the Chrysler Group) prevent the vehicle from starting, or cause it to move unintentionally once the ignition kicks over, the automaker will begin notifying owners of the affected vehicles just before Valentine's Day to bring their trucks into their local dealers to have the clutch ignition interlock switch replaced. FCA emphasizes, however, that the unintended movement would only occur "in rare cases" and only "if recommended starting procedures are not followed." Only one such case is known to have occurred, but it did regrettably result in a fatality. Statement: Clutch Ignition Interlock Switch December 29, 2014 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary global recall of an estimated 66,819 older-model pickup trucks equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. An investigation by FCA US engineers discovered switches in certain model-year 2006 and 2007 pickups may be equipped with spring wire that differs from wire used in previous switches. The alternate wire may break and, as a result, the vehicles may not start. In rare cases, a vehicle may – if recommended starting procedures are not followed – exhibit unintended movement when its ignition key is turned. The Company is aware of one fatality related to this campaign. It stemmed from the single known accident involving this population of vehicles. The recall covers certain Dodge Dakota, Dodge Ram 1500, 2500, 3500 and Mitsubishi Raider pickups. Switches with the alternate wire were not used in any vehicles produced before July of 2005, or after June of 2006. The Dakota and Raider are no longer in production.

Dodge rolls out Shaker package for 2015 Challenger

Having an awesome Hemi engine under the hood can deliver impressive performance, but for those who lament not being able to see that big V8 engine doing its thing, hidden away under the hood, Dodge offers the Shaker hood on its Challenger muscle car. And it's just released the option for the updated 2015 model. Now available on two engines and three trim levels – including the Challenger R/T and R/T Plus with the 5.7-liter V8 and the 6.4-liter Challenger 392 – the new Shaker hood brings cold air into the engine compartment and lets everyone see that V8 (or at least an appendage thereof) shaking away in plain view. Arriving 45 years after the original Shaker Challenger, the package includes a satin black hood scoop, cold-air intake, conical air filter and optimized air box, along with Shaker graphics inside, out and under the hood. The 2015 Dodge Challenger R/T Shaker and R/T Plus Shaker are available to order now, priced at $35,495 and $38,495, respectively (plus a $995 destination charge), and come bundled with the Super Track Pak. Order books open in March for the 392 HEMI Shaker, which also comes with the Scat Pack, for $42,495 (plus destination and $1,000 gas-guzzler tax if equipped with the manual transmission). Dodge is Shaking Up the Muscle Car Segment Again; Opens Orders for New 2015 Challenger 'Shaker' Models Dodge Celebrates 45 Years of Its Functional "Cold-air Grabbing" Hood Scoop That "Shakes" With the Legendary HEMI® V-8 Engine's Movement - Back by enthusiast demand, Dodge returns the "Shaker" to the Challenger lineup – now expanding the functional cold-air induction hood scoop on two HEMI V-8 engines and three performance-packed models - "King of the Shakers" – all-new 2015 Dodge Challenger 392 HEMI Scat Pack Shaker combines the ultimate combination of 485 best-in-class horsepower and legendary Dodge heritage cues with a functional Shaker hood - Dodge Challenger R/T Shaker and R/T Plus Shaker models feature the legendary 5.7-liter HEMI V-8 engine with unique hood and intake design combined with a functional exposed-element cold-air intake system - New 2015 Dodge Challenger R/T Shaker and R/T Plus Shaker are available for ordering now, with the 392 HEMI Scat Pack Shaker model available for customer orders in March February 13, 2015 , Auburn Hills, Mich.

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016