73 Dodge Challenger 340 Restored Gorgeous Muscle Car on 2040-cars

Auto blog

Dodge Charger Widebody is rumored on its way for 2020

Grab all the salt you have, save the amount you need for your recommended daily allowance. Mopar Insider reports its sources as having confirmed Dodge will unveil a Charger Widebody for the 2020 model year, in SRT Hellcat and R/T Scat Pack trims. Such a move would copy the trim and aesthetic formula used — to excellent affect — on the Dodge Challenger. The Charger widebodies would get also get unique suspension tuning, and the same 305/35 ZR 20 Pirellis as on the Challenger widebodies, but wrapped around unique, dual-five-spoke designs that are 11 inches wide. There has been talk of a widebody Charger for at least two years, many of those conversations carried out in the same way sleuths parse grainy photos of monsters. In April 2017, Instagram user gtpprix caught a standard Dodge Charger wearing Challenger widebody wheels, spaced so that the rubber extended beyond the fenders. A month later, a YouTube account in the name of Sinister Life caught the same car on video. The license plate doesn't appear to be from Michigan, which is where almost all Dodge prototypes get licensed. On the other hand, early spy shots of Challenger widebody prototypes from 2016 featured this same setup — a normal version with protruding tires. The SRT CEO at the time, Tim Kuniskis, joked about testing the Challenger widebody openly, knowing everyone would think it was a prototype Demon. According to Mopar Insider, engines and outputs won't change on the Charger widebody versions. That means sticking with the 485-horsepower, 6.4-liter V8 in the R/T Scat Pack, and the 717-hp, 6.2-liter V8 in the Charger Hellcat. Looks would change, however, with new front and rear fascias to differentiate the model and cohere with the new lines. That includes a new dual-snorkel hood grille and repositioned intakes, plus tweaked side sills. If it's really on the way, we should know this summer. Such a model would also support recent comments from Steve Beahm, head of Dodge, Fiat, and Chrysler brands, when Automobile asked about how the company will maintain any momentum in difficult days for sedans. Beahm said, "[Our] our job was to [ask,] 'How do we differentiate within the brands that are going to remain passenger-car brands?' ... What we do is we try to make our vehicles look different." Related Video:

One Lap of America, with three times the madness

Instead of celebrating last weekend face down in a sombrero full of tequila-spiked OJ and a few lime wedges, 71 racing teams with one set of tires each and no support crews began Cinco De Mayo — and this year's 35th running of the One Lap of America — by hitting the wet skid pad at Tire Rack's headquarters in South Bend, Ind. There were Porsches, Vettes, Camaros and BMWs galore. There was a Miata, a vintage NSX, a Honda S2000 and even an old VW Rabbit. There were GTIs, the odd Evo and, oh yeah, six Toyotas, a couple of Vipers and a couple of GTRs. When the skidding stopped, a 2011 BMW 1M emerged triumphant and led the pack out into the heartland, where it will spend 5,000 miles this week hitting road courses, dragstrips and time trials at tracks as far west as Denver, as south as Fort Worth and then New Orleans. From there, it will barrel north through Mississippi, Alabama, Nashville, Kentucky and back home again to Tire Rack in Indiana. Twenty events, eight venues, with a three-hour window for each event. It's a nonstop, no-sleep, one-week road trip comprising 150-ish friends and brothers, partiers and pro racing drivers, spouses and other family-member combo packs. Some will never speak to each other again, some might end up divorced, some might get married. All of them are nuts. I know this because I made three laps. Three laps I will never forget.LAP ONE: 1984 Vehicle: 1984 Dodge Van Team #0: Jean Lindamood (Jennings), Walker Evans, Parnelli Jones I was present for the inaugural 1984 One Lap of America because I worked at Car and Driver back then and so did Brock Yates. He was the guy who came up with the clandestine, illegal, unsanctioned Cannonball Baker Sea-to-Shining-Sea Memorial Trophy Dash from Connecticut to Redondo Beach, Calif. It ran five times in the 1970s, with Yates joining Dan Gurney in a Ferrari Daytona for the second run. They won, Gurney insisting that "at no time did we exceed 175 miles per hour." One Lap was born of Cannonball nostalgia (read: Brock was bored), and I was beyond game for it. After securing a van from Dodge and two giant decals for the van sides, along with $5,000 in sponsorship from local Detroit Stroh's Brewery, I coaxed my friend, nine-time Baja 1000 winner Walker Evans, into running One Lap by suggesting he didn't have a hair on his ass if he refused. Then I suggested that if he didn't get his best friend and longtime road trip buddy, Parnelli Jones, to go with us, I would actually have to drive the van, too.

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.