2022 Dodge Challenger Challenger Redeye 6.2l 8 Sunroof on 2040-cars

Auto blog

Stellantis launching at least 25 EVs for America by 2030

Stellantis has announced a wide-ranging plan for the company through 2030 covering everything from product to financials. The product plans are what really caught our attention, particularly for the surprise reveal of the first electric Jeep, as well as new teasers of the electric Ram 1500. But the company also provided more broad details on what we'll be seeing in the future including both electric cars and hydrogen fuel cell vehicles. All of the plans are in service of the Stellantis goal of reaching net zero carbon emissions by 2038. On that way, it plans for all European vehicle sales and half of all American sales to be electric by 2030. It will launch 75 new electric vehicles by that year, and at least 25 of them will be coming to the U.S. The first of those electric cars will be the aforementioned Jeep in 2023, but many Stellantis models will follow close behind. The electric Ram ProMaster will launch in 2023 as well. In 2024, we'll see the electric Ram (and its plug-in hybrid counterpart), two more Jeeps (an off-road model and a family-oriented model) and the Dodge electric muscle car. We'll get a preview of the Dodge with a concept this year. Then in 2025, Chrysler will launch its electric car, likely based on the Airflow concept. Stellantis has previously announced Chrysler will be fully electric by 2028, and it further announced that Alfa Romeo and Maserati will be fully electric by 2030. Stellantis is also working on hydrogen fuel cell vehicles, mainly for commercial use. For the U.S., it plans on offering a large, ProMaster-size hydrogen van in 2025. That year or a little later, it also has plans for a hydrogen heavy-duty pickup truck, presumably Ram 2500 and 3500. Stellantis CEO Carlos Tavares noted that among the benefits of hydrogen for large and commercial vehicles is being able to avoid compromising payload capacity, since hydrogen powertrains are lighter than giant batteries. Hydrogen filling times are quick relative to charging, too. The company will continue working on and offering advanced driver aids. This year it will offer hands-free cruise control like GM's Super Cruise and Ford's BlueCruise. In 2024, the company intends to introduce a system that is hands-free and won't require the driver to be watching it the entire time. The technology is being developed alongside BMW. These are, of course, broad plans, and they could change as time goes on. Expect more details as we get closer to individual product releases.

2018 Dodge Challenger SRT Demon First Drive | Don’t fear the Demon

"If you're not hurt, we'll be really pissed. If you are hurt, we'll still be pissed, but not quite as pissed." These are the words from Jim Wilder, the vehicle development manager of the 2018 Dodge Challenger SRT Demon, that echo through our head as we slide behind the wheel of the car for the first time. He was warning us about driving beyond our abilities, and keeping the car out of the wall. With 840 horsepower and 770 pound-feet of torque on tap from its supercharged, 6.7-liter V8, the Demon does 0-60 miles per hour in 2.3 seconds, and 0-30 mph in a second flat. If something does go wrong, it'll happen quickly. Following that talk, we had our guts sloshed as a passenger in a blurry eighth-mile run, giving us a taste of the G forces (the Demon can pull 1.8 G in a straight line) we'd feel when we got in the driver's seat for our own pass down the drag strip. We're already sweating. It had rained - you could describe it as torrential - the day before. The grassy parking areas surrounding Lucas Oil Raceway were still flooded, but any water on the pavement had evaporated and hung in the air. Combined with the heat, we were sticky and uncomfortable. In Drag Mode, the Dodge Demon's air conditioning turns off. Any condensation that it could leave on the track would be a problem, plus we need to reduce parasitic power losses for a faster run. The system is still working, though, the refrigerant diverted to the chiller system cooling the air coming into the engine. There's still condensation, but the Demon collects it on a catch pad to keep it from ending up on the pavement. We're also required to roll the windows up when entering the drag strip. For one thing, it helps keep the smoke out of the cabin during the pre-staging burnout. So, yeah, it's hot as Hell in the Demon. We pull through the water box and run through the sequence – which involves holding the "OK" button on the steering wheel usually used to navigate menus, and applying a specific amount of brake pressure before getting on the throttle to initiate the burnout. This gets any crud off the rear tires and heats up the rubber. There are multiple ways to launch the Demon. We had an instructor sitting in the passenger seat as we pulled up to the beams that trigger the Christmas tree at Lucas Oil Raceway. He walks us through the most complicated of the three he had explained to us just minutes before when we were in the passenger seat.

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.