2010 Dodge Challenger Se 52k No Reserve Salvage Rebuildable Mopar on 2040-cars

Auto blog

Weekly Recap: Ferrari plans to gradually increase production by 2019

Ferrari has long been known for the exclusivity of its performance machines. It's on a different level than Porsche, BMW, and Mercedes. But as it transitions to a new era of independence from Fiat Chrysler, Ferrari is going to get a little less exclusive. It's by design, and it means a subtle, slow ramp-up of production – a move Ferrari believes will ensure its future by meeting growing demand in new markets. The strategy was detailed in SEC documents filed this month as part of the company's pending stock offering. The files reveal Ferrari will gradually increase shipments to about 9,000 units per year by 2019. This is a reversal of Ferrari's 2013 plans to cap production at 7,000 cars annually, which it hit on the nose that year. Ferrari shipments inched up to 7,255 in 2014, though that's down from 2012's record tally of 7,405. Ferrari is a vastly different operation than it was in 2013. Longtime chairman Luca di Montezemolo stepped down last fall, and FCA chief executive Sergio Marchionne has been overseeing the company since then. Its IPO has attracted high levels of attention from enthusiasts and investors. As expected, demand has reportedly outstripped the availability of the stock, which has an estimated offering price of $48 to $52 a share. Speaking of more Ferraris, the company revealed a limited-edition model this week called the F12tdf (shown above). Based on the F12 Berlinetta, the car is a salute to the Tour de France endurance auto race that Ferrari dominated in the 1950s and '60s. The V12 engine's output increases to 769 horsepower, while weight is cut by 243 pounds – allowing for a sprint to 60 mph in 2.9 seconds. Dramatic carbon-fiber elements and a radical redesign of the body panels give the F12 a more dramatic look. It will be limited to 799 units over the life of the car. If this is how Ferrari is increasing production, we're more than okay with the company's new strategy. OTHER NEWS & NOTES Tesla software unlocks Autopilot features Tesla released the latest version of its software for the Model S this week, which allows the all-electric sedan to drive in a semi-autonomous state called Autopilot. Tesla Version 7.0 enables the Model S to maintain lane position, change lanes by touching the turn signal, and manage the car's speed using an advanced, traffic-sensing cruise control. It also has a parallel parking feature, which searches for open spots and then parks your Tesla.

Dodge Durango could get eTorque mild hybrid system in 2020

The 2020 Dodge Durango appears slated to get a mild-hybrid powertrain option. That's the word from moparinsiders.com, which unearthed the news from documents relating to contract negotiation between the FCA and the UAW. Although the documents give no further details, it's a pretty safe bet that we're talking about Chrysler's eTorque mild-hybrid system, which was introduced on the Ram 1500 pickup and has since been extended to the Jeep Wrangler. Currently, the Wrangler offers the eTorque system on the 2.0-liter inline-four and the 3.6-liter Pentastar V6, both on the Sahara model only, while the Ram 1500 makes the mild-hybrid system standard with the 3.6-liter V6 and an option with the 5.7-liter Hemi V8. The V6 eTorque powertrain makes 305 horsepower and 269 pound-feet of torque (Ram) or 285 horsepower and 260 pound-feet (Wrangler). The Wrangler's four-cylinder eTorque is good for 270 horses and 295 lb-ft. The V8 version in the Ram is good for 395 horsepower and 410 lb-ft of torque. In all cases, the eTorque system does not increase peak output over the standard version of the gasoline engine. The mild-hybrid system does provide a minor fuel-economy boost. In the Wrangler, the 3.6-liter with eTorque has EPA city estimates that are 1 mpg better than without the system. On the Ram's V8, eTorque adds 2 mpg city and 1 mpg highway. (The 2.0-liter sees no improvement in its EPA ratings.) It's not known whether the Durango will add eTorque to its V6, or V8, or both. Either engine could do with a fuel-economy boost, as the V6 is EPA rated at 19/26 mpg city/highway (RWD) and 18/25 mpg (AWD), while the V8 version has estimates of 14/22 mpg. Related Video:

2014 Challenger R/T Shaker, Mopar '14 Challenger bring back iconic hood

Enamored of the Dodge Challenger but wish you could get one with a shaker hood? We've got good news, because Dodge and Mopar have teamed up to bring it back.
The 2014 Dodge Challenger R/T Shaker packs the same 5.7-liter Hemi V8 as the standard Challenger R/T, but upgrades the business end with a through-the-hood exposed cold-air intake system. The retro hood scoop protrudes from the center of the hood in satin black (matching the decklid spoiler) to feed the Hemi and shakes with the engine just like the original from 1970. The Shaker model also comes with a Super Track Pak that adds a new steering rack, brake linings, shocks and 20-inch Goodyear Eagle F1 Super Car rubber. You can also shut off the stability management system completely in this car. A series of interior and exterior trim enhancements round out the look. The whole package adds $2,500 to the price of a Challenger R/T Classic for an all-in MSRP of $36,995.
In case that's not enough, Dodge is also offering a limited-edition Mopar Challenger that follows the 2010 Mopar Challenger, 2011 Mopar Charger, 2012 Mopar 300 and 2013 Mopar Dart. Limited to just 100 examples, the 2014 Mopar Challenger gets the same Shaker hood intake, unique graphics and wheels, an enhanced interior and a long list of optional extras from the Mopar parts catalog. Dodge isn't saying just yet how much the Mopar Challenger will cost, but you can bet it will command a considerable premium for the exclusivity alone.