2009 Dodge Srt8 on 2040-cars

Auto blog

Watch these Dodge Demons explode on a Texas drag strip

The Dodge Challenger SRT Demon is extremely quick. It can hit 60 mph from a dead stop in less time than it takes to read this sentence thanks to its supercharged 6.2-liter V8. That engine makes up to 840 horsepower and 770 pound-feet of torque, depending on what octane is running through the fuel lines. That's a ton of power going solely to the rear wheels. So much so that Dodge developed a number of features and a new set of tires specifically for the car. In our time with the Demon, the car took abuse run after run on a drag strip without skipping a beat, but it seems some actual owners aren't quite so lucky. Just take a look at what happened to a few of these cars. You can see the whole car shake and jitter right as the whole rear explodes in front of the tree. It seems the initial shock from the launch — the most taxing bit of any drag run — is what kills the differentials. Catastrophic failure is rarely pretty, but it is neat to see the whole thing occur in slow motion. Three more cars — four stock and one modified in total — suffered similar fates. Not a great look for Dodge or SRT. According to The Drive, a private drag event in Texas drew a number of Demon owners all trying to beat NHRA NHRA Top Fuel racer Leah Pritchett's time in her personal Dodge Demon — 42 stock Demons attended along with five modified cars. While no one managed to match her 9.65-second quarter-mile run, a few owners did dip below 10 seconds. Now, there are a few of caveats we must address. First, with any modified car, you run the risk of breaking something, even with a car that's set up from stock specifically for drag strips. Even a set of tires like the Mickey Thompsons shown in the video above can have an effect on driveline components. Horsepower may be king, but it's torque that's the rear killer. All that torque sends a shock through the car. Adding even more with aftermarket parts increases the risk of something failing. The modified car was apparently pushing out about 1,000 horsepower. That said, four of the five vehicles were stock, so any extra power or torque should theoretically be a non-factor. The drag strip's surface was maintained by a company called Mass Traction. FCA used Mass Traction during the Demon's development, so that too should be a non-factor in the part's failure. It's unclear what exactly caused the failures, though The Drive reports that FCA officials are investigating the matter. Related Video: This content is hosted by a third party.

Mopar Dodge Challenger special edition celebrates a mod decade

Despite the current Dodge Challenger hitting the age of 11 this year, it continues to be a top seller for the brand. One of the reasons for its popularity is its customizability. FCA acknowledges this with the just-revealed, limited-edition Mopar 2019 Dodge Challenger celebrating its factory-backed performance parts and accessories straight from the its own in-house parts division. For 10 years, Challenger owners have benefited from upgrades directly from Chrysler’s Mopar division. This has been a big deal because tuning a car often required aftermarket parts, which could jeopardize factory warranties. But with upgrades directly from original equipment manufacturers, such a risk was eliminated. “Over the last decade, weÂ’ve customized an impressive group of vehicles with exclusive Mopar performance parts and accessories that our enthusiast customers crave,” said Mark Bosanac, head of Mopar Service in a statement. “This year weÂ’re commemorating our tenth Mopar build with another unique and collectible Dodge Challenger, which continues to be the modern muscle car every bit as beloved today as the first-generation vehicle was 50 years ago.” The 2019 Mopar Dodge Challenger starts life as R/T Scat Pack model. Under the hood sits a 392-cubic inch (6.4-liter) Hemi V-8 with 485 horsepower and 475 pound-feet of torque with the choice of a six-speed manual or an eight-speed automatic. But Mopar sweetens the deal by adding a performance cold-air intake, strut tower braces to improve structural rigidity and handling, as well as strut caps and braces painted in silver for eye candy whenever the hood is popped. ItÂ’s only available in two hues, Pitch Black or White Knuckle, and comes with a variety of bespoke interior and exterior upgrades. They include special Mopar Shakedown graphics and blue striping from the front fascia all the way back to the rear decklid spoiler. Completing the look is a set of 20x9-inch forged aluminum wheels wrapped in Goodyear P245/45ZR20 performance tires and the optional shaker hood package made standard. Sales commence next month with a starting price of $45,835.

Experience the New York Auto Show by drone

The Autoblog team recently returned from wildly running around the Javits Center to cover all the news and debuts at the New York Auto Show. Sometimes, it's nice to take a more serene look at the exhibition floor, though, and the event's organizers are providing that exact opportunity by flying a drone through the hall. Combined with the down-tempo music, this clip feels like a form of automotive meditation. If you're going to miss the show in the Big Apple, the drone also provides a good overview at the exhibition floor, especially at the stands from Lexus, Buick, Dodge, Mercedes-Benz, Toyota and BMW. Plus, it's a fun way to see some vehicles from a completely different angle than they ever appear on the road. Related Video: News Source: New York International Auto Show via YouTube Auto News New York Auto Show BMW Buick Dodge Honda Lexus Mercedes-Benz Toyota Videos drone 2015 ny auto show