2009 Dodge Challenger Se Coupe 2-door 3.5l on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.