2008 Dodge Challenger Srt8 Coupe 2-door 6.1l on 2040-cars

Auto blog

Junkyard Gem: 1977 Dodge Colt Mileage Maker Coupe

While Ford and GM each had the resources to develop their own Michigan-designed subcompacts for the dawn of the 1970s— the Pinto and Vega, respectively— Chrysler couldn't afford the huge price tag for such a project. Instead, Chrysler's European operations were tapped for a couple of models that sold well enough on the other side of the Atlantic, giving us the Plymouth Cricket (known as the Hillman Avenger in the UK) and the Simca 1204 (aka the Simca 1100 in France). American car shoppers gave those two models the cold shoulder, but then Chrysler found genuine sales success by making a deal with Mitsubishi to sell the Colt Galant with left-hand drive. This became the Dodge Colt, with sales beginning in the 1971 model year. Though the 1971-1978 rear-wheel-drive Colts were once as commonplace as Corollas or B210s on American roads, they have all but disappeared today. That makes today's Junkyard Find, discovered in a Denver-area yard last week, particularly interesting. This car shows signs of having been in the hands of a speed-crazed enthusiast owner, including an aftermarket steering wheel and one-piece racing seats with slots for five-point harnesses. The primer-gray paint is another clue. The rear-wheel-drive Colts were reasonably quick for their time, and they could be made genuinely quick with basic engine upgrades. This Mitsubishi Saturn four-banger has a tube header, hot-rod ignition system, and a two-barrel (Mikuni-made) Solex carburetor. We can assume there's probably some kind of cam upgrade under the valve cover, too. The shifter is gone, but the original transmission in this car was either the base four-speed or optional five-speed manual. A three-speed automatic was available for $270 (about $1,275 today). Later on, front-wheel-drive Colts (and Mitsubishi Mirages) could be bought with the Twin-Stick overdrive rig, which gave drivers eight forward speeds and the opportunity to make Twin-Stick beer taps. The 1977-1978 Dodge Colt two- and four-door sedans were based on the Mitsubishi Lancer and were a bit smaller than the 1971-1977 cars, while the wagon version moved to the Galant Sigma platform. The build tag shows that this car started life as the cheapest 1977 Colt model, the "Mileage Maker" two-door sedan (Dodge dealers called it a coupe, so that's what I'm calling it in the title).

121k Dodge Darts being investigated over braking problem

The National Highway Traffic Safety Administration is investigating the Dodge Dart due to reports of braking problems. Some 121,000 cars are possibly affected, all from the 2013 model year. According to The Detroit News, NHTSA received 18 complaints about the brake pedal becoming hard to depress on these cars, increasing stopping distance. Drivers reported hearing a "pop noise or an air hissing noise when applying the brake pedal, followed by a hard pedal feel and reduced brake effectiveness," NHTSA told the News. In a particularly terrifying incident, one driver says the Dart's braking system shut down while driving at 50 miles per hour. "I feared for my life. It is one of the scariest things I have ever dealt with," the complaint said, according to The Detroit News. A Fiat-Chrysler spokesperson said the automaker is "fully cooperating" with this investigation.

The Dodge Demon gets a Drag Mode and a lesson in Newtonian physics

It's Thursday morning, which means we have more news on the upcoming Dodge Demon, the pumped-up Challenger Hellcat variant that's looking to cause mayhem at a drag strip near you. This week's video, "Third Law," shows the Demon's revised suspension in action and displays another one of SRT's cryptic messages. Dodge claims that the 6.2-liter supercharged Hemi V8 in the Hellcat twins is compromised because it's fitted to a car that needs to be comfortable on the street in addition to a performer on the drag strip. Not so with the Demon, as Dodge says the car is "designed to be highly competent in all drive modes and configurations," including the all-new Drag Mode. Dodge says details about the new mode will trickle out over the next few weeks, but all the info this week focused on suspension. The "Third Law" in this week's title refers to Isaac Newton and motion: "When one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body." We're not sure what Newton would have thought seeing the sidewall wrinkling Nitto NT05R drag radials in action, but he'd probably have a reaction of some sort himself. An ideal suspension setup for the drag strip makes for a poor setup on the road. As Dodge puts it, the "old school" way to set up a drag car was to "get the quickest reacting springs upfront, the softest rebound front shocks that wouldn't restrict the springs' reaction, remove any restrictions (sway bar) and increase the compression of the rear shocks." This would give a car great front to rear weight transfer but made for very poor lateral direction control, meaning minor corrections were difficult. The Demon's Drag Mode will use electronics to give the car the best combination of launch and lateral stability. Dodge listed some of the parts to help aid in this goal. They also gave us a few equations that we can't make sense of. Let us know if you have any clues. Hardware: 35 percent lower rate front springs/28 percent lower rate rear springs 75 percent lower rate hollow front sway bar/44 percent lower rate rear sway bar Drag-tuned Bilstein Adaptive Damping Shocks Software: Rear = F/F and Front = F/S F/F – F/S maintained @ wide open throttle (WOT) F/F – F/F < WOT Traction control disabled/ESC maintained Result: 13.5=575@500 Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.