1974 Dodge Challenger on 2040-cars

Auto blog

Dodge Viper plant will close for good Aug. 31

It has been a long time coming, an end rumored since at least 2015, but after 25 years, the Dodge Viper's demise is nigh. Production of the $90,000 bespoke sports car is ending. Therefore, FCA will be shutting down its Conner Assembly Plant on Aug. 31. Automotive News reports that the Detroit plant will be shutting down. The car has been hand-built there since 1995, save for a hiatus in 2010-13 (production began at FCA's Mack Plant in 1992). The Prowler was built there, too, from 1997 to 2002. More than 80 workers currently build the Viper, making Conner FCA's smallest assembly facility. But not many Vipers are sold - 630 last year - despite an enthusiastic following. And of course FCA's own 707-horsepower Dodge Challenger and Charger SRT Hellcats and new 840-horsepower Challenger SRT Demon can't help matters. But the last straw is the fact the Viper can't comply with new safety requirements going into effect. On the bright side, the UAW has seen the plant closure coming since 2015, and FCA has told the state of Michigan that it expects to find positions at other plants for the Viper crew. FCA has been celebrating the Viper valedictory for a couple of years now, offering serialized special editions, including the $121,000 Viper ACR, and touting the ability to build unique Vipers with its "1 of 1" customization program, with a choice of 16,000 unique paint colors and 48,000 unique stripe combinations. Related Video:

UAW papers reveal release dates for new Dodge, Jeep and Ram models

Documents published by the United Auto Workers union reveal key information about some of the products Dodge, Jeep and Ram will release during the early 2020s. All three brands will try to capitalize on the growing demand for trucks and SUVs in the United States. The agreement between the UAW and Fiat Chrysler Automobiles (FCA) outlines what the period between 2019 and 2023 will look like from an employee's vantage point. The $4.5 billion factory the automaker is building in Detroit will begin manufacturing a three-row Jeep model in 2020, and it will add the next-generation Grand Cherokee to its roster the following year, according to CarScoops. The new Grand Cherokee will also roll out of the Jefferson North facility that makes the current model scheduled to retire shortly before its successor arrives. The Dodge Durango will continue to be built there, and the UAW papers mention a mild-hybrid variant of the SUV due out before the end of 2020. Two body-on-frame Jeep models tentatively scheduled to revive the heritage-laced Wagoneer and Grand Wagoneer nameplates will break cover in 2021. They will be built alongside Ram pickups at the Warren Truck plant, and odds are the three models will share several components under the sheetmetal. Adding the two Jeep models is expected to create 1,400 jobs, FCA predicted. Speaking of Ram, the high-performance TRX model (pictured) aimed at the Ford F-150 Raptor's jugular is penciled in for a 2020 launch. The concept that previewed the model made its debut in 2016, so it's reasonable to assume it will have changed considerably by the time it reaches showrooms. It will be based on the newest variant of the 1500, not on the last-generation model still sold as the Classic. What won't change is the supercharged, 6.2-liter Hellcat V8 between its fenders. The plug-in hybrid Wrangler remains on track for a 2020 launch. The Cherokee will continue to come out of Belvedere Assembly in Illinois, but the UAW's documents mention "fresh models / features" off of its unibody platform. Whether that means new trim levels or additional body styles remains to be seen, but it sounds like something new and Cherokee-related is around the corner. The ancient Dodge Journey shares at least one thing with the beater you drove in high school: a four-speed automatic transmission. The gearbox is finally on its way out, according to the UAW, and the 2.4-liter four-cylinder engine that powers the entry-level model isn't long for this world, either.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.