1972 Dodge Challenger 5.7 Hemi on 2040-cars

Auto blog

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video:

Burglars target Detroit-area dealership, steal Hellcat from showroom floor

A crew of Detroit car thieves seriously upped their game this week after stealing a Hellcat Challenger straight off the showroom floor. According to CBS Detroit, at around 1:00 am on January 24, a crew of burglars hit the Snethkamp Ram City dealership in Highland Park, MI. In full view of surveillance cameras, the burglars smashed a large glass door that led to the showroom floor and within seconds made off with a $75,000 Dodge Challenger SRT Hellcat. First they pushed the car through the broken door and out on to Woodward where a van was waiting. The van then pushed the car to a waiting tow truck and, just like that, the car and the crooks were gone. "It looks like they had about a minute and 30 seconds to open the door and push the car out, and then we see another car pushing it away," owner Mark Snethkamp told WWJ. "We've got some really good video and I'm shocked that the Highland Park police didn't catch them because they were here very shortly right after them." Snethkamp also told WWJ that they haven't had a break-in at the dealership like this since the 90s. Both the car and the suspect remain at large, and the Detroit Police Department are encouraging anyone with information to call either DPD or the Help Eliminate Auto Thefts (HEAT) tip line. VIDEO-2: Not gone in :60 but :90. Thieves still a $75,000 @DodgeHellcat off the showroom floor in #HighlandPark. @WWJ950 @CBSDetroit pic.twitter.com/8FvDkgboJ5 — Vickie Thomas (@VickiethomasWWJ) January 24, 2017 News Source: CBS Detroit Auto News Dodge Coupe Performance Detroit thieves challenger burglary

FCA, Ford idle plants due to semiconductor shortage

DETROIT (Reuters) - Ford and FCA will become the latest automakers to idle production facilities due to a semiconductor shortage. Ford's Louisville Assembly Plant in Kentucky will idle for a week, borrowing a down period from later in the year to compensate. Per Automotive News, FCA is idling its Brampton facility in Ontario, Canada, and one other site which has not yet been identified.  Louisville Assembly is the production site for the Ford Escape and Lincoln Corsair SUVs; Brampton Assembly produces the Chrysler 300, Dodge Charger and Dodge Challenger for FCA.  A Ford spokeswoman, who declined to identify the semiconductor supplier, confirmed the temporary shutdown to Reuters. In this, FCA and Ford join Nissan and potentially Honda in idling production in the wake of the shortage, which also hit Volkswagen late last year. The shortages are being blamed on consumer demand for silicon after production slowdowns resulting from the coronavirus pandemic. Volkswagen said it had to adjust production schedules in China, Europe and North America to compensate.  Nissan said it planned to reduce production of the Note, a hybrid electric car, at its Oppama Plant in Kanagawa prefecture, Japan, but did not give details of the scale of the output cut. The Nikkei newspaper reported that Nissan would slash its Note production at Oppama to about 5,000 units in January, from an initially planned 15,000 units. "A global shortage of semiconductors has affected parts procurement in the auto sector. As a result of this shortage, the Oppama Plant in Japan will adjust production in January, reducing production of the Nissan NOTE," Nissan said in a statement. (This article contains reporting from Reuters.)     Auto News Plants/Manufacturing UAW/Unions Chrysler Dodge Ford