12 Srt8 8k Mi Navigation Sunroof Heated Leather Seats Warranty on 2040-cars

Auto blog

A look at the Dodge Demon's drag settings, modes, and go-fast tech

In the same video that gave us a peek at the 2018 Dodge Challenger SRT Demon's performance stats, there's a serious dump of info on the tech and tools that will likely help this muscle coupe slaughter drag strips. Dodge has outlined a few of them for us and we're using the power of inference to figure out the rest. Here's what we've gathered. A lot of these hints come from the Demon's version of Performance Pages, the infotainment screens that show what SRT models are doing and let the driver change the powertrain and chassis setup. There are a lot of Demon-only features, including line lock, a quick cooldown mode for the supercharged engine, and data recording. And of course there are pages to show a digital time slip with acceleration and braking figures, a g-load plot, and lots of gauges to track temps and levels. The engine output is shown in the video on a special Dyno page. It tracks horsepower and torque over time on the upper graph, and engine rpm and shift points on the lower graph. And we think it's still hiding something. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Any good drag car has a line lock, allowing the driver to lock the front brakes and leave the rears free to do a nice tire-warming (or tire-shredding, depending on length) burnout. Ford has it on the Mustang, Chevy puts it on the ZL1, and now Dodge is adding it to the Demon. It should help get the giant Nitto tires up to temp for a drag run. And once the tires are warm, there's launch control, just like on the SRT Hellcat, with selectable rpm to dial things in for the conditions. The Demon also has a shift light in the cluster, and the driver can set a shift point individually for each gear. After each drag run, you can activate Quick Cooldown, which Dodge says uses the first production application of After-Run Chiller – it runs the cooling fan and intercooler coolant pump with the engine off until the coolant reaches its target temp. It's shown in one of the slides above. The checklist on the left side of that page suggests it requires a set of conditions be met to work: engine off, hood open, and sufficient battery level. This further reinforces our theory that the supercharger is going to make big boost, beyond the Hellcat's 11.6 psi. And while you're waiting for the supercharger to cool off for another run, you can review the performance data the car records.

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

The final-year Viper special editions sold out so fast Dodge is adding more

Viper collectors don't mess around. After Dodge opened ordering for its 25th anniversary 2017 Viper models – some of the last ones that will be built – all of the cars were spoken for in just five days. The company managed to sell 206 cars, an average of about 41 per day. Compare that to the 241 Vipers sold through May of this year and you can see why special editions make good business sense. Demand was so strong that Dodge will add a sixth special-edition for the Viper's last year of production. Within the group of five initial special packages, the winner was the 1:28 Edition ACR; all 28 went in 40 minutes. Dodge sold the 31 VooDoo II Edition ACRs in two hours, while 25 Snakeskin Edition GTCs and 100 GTS-R Commemorative Edition ACRs took two days to sell out. The 22 Dodge Dealer Edition ACRs took five days – apparently the dealers were too busy taking orders for the other 184 cars they didn't have time to order their own. The additional anniversary car is called the Snakeskin ACR. Dodge will build "up to" 31 of them, which we're pretty sure means exactly 31 if the previous demand is any indicator. The count matches the 2010 run of Snakeskin ACRs and will take the final-edition total to 237. We don't have any photos of that one yet, but you can get a good idea of what it will look like from the Snakeskin GTC. This one features Snakeskin Green paint, obviously, with a custom snakeskin-patterned SRT stripe, the ACR Package, the Extreme Aero Package, carbon-ceramic brakes, the ACR interior, a serialized Snakeskin badge on the instrument panel, and a custom car cover with the owner's name by the door. It will be available to order in the middle of this month, which means it will be sold out well by the end of the month. Chances are these and many of the others will go to mega-collectors like Wayne and D'Ann Rauh of Texas, who, at last count, owned 79 Vipers. Seventy-nine. Like we said, Viper collectors don't mess around. Related Video: